Exhaust Manifold
Show/hide table
Illustration 1 | g02071853 |
Front view of engine |
Show/hide table
Specification for 313-4066 Exhaust Manifold Gp | |||
Item | Qty | Part | Specification description |
1 | 4 | 3J-5389 Plug | Before assembly, apply Loctite C5A Copper anti-seize to the threads. |
2 | 8 | 6V-1943 High Temperature Bolt | Before assembly, apply Loctite C5A Copper anti-seize to the threads. |
Show/hide table
Illustration 2 | g02071854 |
Top view of engine |
Show/hide table
Item | Qty | Part | Specification description |
3 | 60 | 5P-3875 Bolt | Before assembly, apply Loctite C5A Copper anti-seize to the threads, and the bearing surfaces. |
Use the following procedure to tighten the bolts:
Tighten the bolts to Again, tighten the bolts to |
|||
4 | 4 | 5P-3961 Bolt | Before assembly, apply Loctite C5A Copper anti-seize to the threads, and the bearing surfaces. |
Use the following procedure to tighten the bolts:
Tighten the bolts to Again, tighten the bolts to |
|||
5 | 8 | 3H-5842 Bolt | Before assembly, apply Loctite C5A Copper anti-seize to the threads, and the bearing surfaces. |
Use the following procedure to tighten the bolts:
Tighten the bolts to Again, tighten the bolts to |
|||
6 | 28 | 225-4340 Clamp | Before assembly, apply Loctite C5A Copper anti-seize to the threads, the bearing surfaces, and the inside diameter of the clamps. |
Torque to |
Caterpillar Information System:
C6.6 Marine Generator Set Intermittent Engine Shutdown
C7 and C9 On-Highway Engines Air Inlet Heater - Test
2010/01/13 Correct Usage of Seals and Spacers on the Valve Mechanism Covers of Some C9 Engines {1107, 7555}
2010/01/14 Electronic Control Module on C6.6 and C4.4 Engines {1251, 1290}
2010/02/25 Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
C6.6 Generator Set System Configuration Parameters
2010/01/25 A New Instruction for the Improved Monitoring of Low Coolant Temperature (LCT) is Now Available on Certain C3.3 and C3.4 Products {4490, 7420}
C6.6 Marine Generator Set Injector Trim File
C175-16 Locomotive Engine Camshaft
2010/03/04 The Communication Adapter II is used for Tier 4 Engines {1926}
2010/03/05 The Communication Adapter II is used for Tier 4 Engines {1926}
C13, C15, and C18 Tier 4 Final Engines Crankshaft Seals
C6.6 Marine Generator Set Diagnostic Code Cross Reference
3508C, 3512C and 3516C Locomotive Engines Air Inlet and Exhaust Lines
C175-16 Engine for Off-Highway Trucks Engine Oil Pump
2010/01/27 A New Flange Nut Is Now Used In the Glow Plug Group on Certain Generator Sets {1412, 7553}
2010/03/02 A Modified Procedure Is Now Used to Seal the Mating Surfaces of the Cylinder Block and the Gasket on Certain Engines {1124, 1201, 7555}
C27 Generator Set Engines Connecting Rod Bearings - Inspect
2010/01/18 New O-Ring Seals Are Used on the Front Housings of 3500 Engines {1151, 1162, 1166, 1206, 1207}
C13, C15, and C18 Tier 4 Interim Engines Diesel Particulate Filter Has Low Inlet Pressure
3508C, 3512C and 3516C Locomotive Engines Water Lines
C175-16 Engine for Off-Highway Trucks Engine Trunnion
3508C, 3512C and 3516C Locomotive Engines Turbocharger
3500 Engines Water Connection Group