Correct Usage of Seals and Spacers on the Valve Mechanism Covers of Some C9 Engines {1107, 7555}
- Truck Engine:
- C9 (S/N: 9DG1-UP; LFR1-UP)
The correct seals and spacers must be used on the 263-7821 Valve Mechanism Cover Gp and the 263-7825 Valve Mechanism Cover Gp. Refer to Table 1 and Table 2 for a list of the parts that must be used with the particular valve mechanism covers.
Show/hide table
Illustration 1 | g02056253 |
(1) Part number of the valve mechanism cover |
The part number of the valve mechanism cover is stamped on the inside of the cover. Refer to Illustration 1.
Show/hide table
Parts for Use with the 263-7821 Valve Mechanism Cover Gp     | ||
Part Number     | Description     | Quantity     |
217-5701     | Bulk Seal     | 1     |
246-5083     | Spacer Sleeve     | 11     |
Show/hide table
Illustration 2 | g02056235 |
263-7821 Valve Mechanism Cover Gp (2) 217-5701 Bulk Seal |
Show/hide table
Parts for Use with the 263-7825 Valve Mechanism Cover Gp     | ||
Part Number     | Description     | Quantity     |
285-4106     | Valve Cover Seal     | 1     |
273-2838     | Spacer Sleeve     | 11     |
Show/hide table
Illustration 3 | g02056275 |
263-7825 Valve Mechanism Cover Gp (3) 285-4106 Valve Cover Seal |
Note: Failure to use the correct seals and spacers on the appropriate valve mechanism covers will result in engine oil leaks and/or failures of the valve mechanism cover.
Caterpillar Information System:
2010/01/14 Electronic Control Module on C6.6 and C4.4 Engines {1251, 1290}
2010/02/25 Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
C6.6 Generator Set System Configuration Parameters
2010/01/25 A New Instruction for the Improved Monitoring of Low Coolant Temperature (LCT) is Now Available on Certain C3.3 and C3.4 Products {4490, 7420}
C6.6 Marine Generator Set Injector Trim File
C175-16 Locomotive Engine Camshaft
2010/03/04 The Communication Adapter II is used for Tier 4 Engines {1926}
2010/03/05 The Communication Adapter II is used for Tier 4 Engines {1926}
C13, C15, and C18 Tier 4 Final Engines Crankshaft Seals
793F Off-Highway Truck Machine Systems Module (Intermittent Wiper) - Remove and Install
Dual Frequency Conversion for the PM3516 Power Module{4467, 4490, 7002} Dual Frequency Conversion for the PM3516 Power Module{4467, 4490, 7002}
793F Off-Highway Truck Machine Systems Electronic Flasher Assembly - Remove and Install
C7 and C9 On-Highway Engines Air Inlet Heater - Test
C6.6 Marine Generator Set Intermittent Engine Shutdown
3508C, 3512C and 3516C Locomotive Engines Exhaust Manifold
C6.6 Marine Generator Set Diagnostic Code Cross Reference
3508C, 3512C and 3516C Locomotive Engines Air Inlet and Exhaust Lines
C175-16 Engine for Off-Highway Trucks Engine Oil Pump
2010/01/27 A New Flange Nut Is Now Used In the Glow Plug Group on Certain Generator Sets {1412, 7553}
2010/03/02 A Modified Procedure Is Now Used to Seal the Mating Surfaces of the Cylinder Block and the Gasket on Certain Engines {1124, 1201, 7555}
C27 Generator Set Engines Connecting Rod Bearings - Inspect
2010/01/18 New O-Ring Seals Are Used on the Front Housings of 3500 Engines {1151, 1162, 1166, 1206, 1207}
C13, C15, and C18 Tier 4 Interim Engines Diesel Particulate Filter Has Low Inlet Pressure
3508C, 3512C and 3516C Locomotive Engines Water Lines