The Communication Adapter II is used for Tier 4 Engines {1926}
- Articulated Truck:
- 730 (S/N: M4X1-UP)
- Engine:
- C13 (S/N: KWJ1-UP)
- Generator Set:
- C27 GEN SET (S/N: ZRS1-UP)
- Industrial Engine:
- C13 INDUSTRIAL (S/N: LGK1-UP)
- 740 (S/N: L4X1-UP)
- C15 (S/N: LDN1-UP)
- C18 (S/N: BDN1-UP)
- C27 INDUSTRIAL (S/N: JFJ1-UP; SDJ1-UP; RAM1-UP; NAR1-UP)
- C32 INDUSTRIAL (S/N: SDK1-UP; NST1-UP)
- C9.3 (S/N: C9N1-UP)
Description of Change: The adapter improves communication and troubleshooting for all Tier 4 engines.
Adaptable To: The 261-3363 Wireless Communication Adapter Gp is not compatible with Tier 4 engines. Use the 171-4401 Communication Adapter As or a newer version of the adapter on all Tier IV engines. Ensure that the latest version of the firmware is installed on the communication adapter. Also, ensure that "Caterpillar Comm adapter II" is selected under the "Preference" section in Cat Electronic Technician (ET).
Caterpillar Information System:
C13, C15, and C18 Tier 4 Final Engines Crankshaft Seals
793F Off-Highway Truck Machine Systems Module (Intermittent Wiper) - Remove and Install
Dual Frequency Conversion for the PM3516 Power Module{4467, 4490, 7002} Dual Frequency Conversion for the PM3516 Power Module{4467, 4490, 7002}
793F Off-Highway Truck Machine Systems Electronic Flasher Assembly - Remove and Install
C27 Generator Set Engines General Information
C27 and C32 Engines for Caterpillar Built Machines Valve Lash Is Excessive
345D, 349D and 349D2 Excavators and 345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine Systems Cab - Install
345D, 349D and 349D2 Excavators and 345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine Systems Cab - Remove
C27 and C32 Engines for Caterpillar Built Machines Power Is Intermittently Low or Power Cutout Is Intermittent
2010/01/28 A New Seal Kit Is Used on G3500C and G3500E Aftercoolers {1063, 7555}
C6.6 Generator Set Engine Pressure Sensor Open or Short Circuit - Test
C27 and C32 Engines for Caterpillar Built Machines Oil Contains Coolant
2010/03/04 The Communication Adapter II is used for Tier 4 Engines {1926}
C175-16 Locomotive Engine Camshaft
C6.6 Marine Generator Set Injector Trim File
2010/01/25 A New Instruction for the Improved Monitoring of Low Coolant Temperature (LCT) is Now Available on Certain C3.3 and C3.4 Products {4490, 7420}
C6.6 Generator Set System Configuration Parameters
2010/02/25 Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/01/14 Electronic Control Module on C6.6 and C4.4 Engines {1251, 1290}
2010/01/13 Correct Usage of Seals and Spacers on the Valve Mechanism Covers of Some C9 Engines {1107, 7555}
C7 and C9 On-Highway Engines Air Inlet Heater - Test
C6.6 Marine Generator Set Intermittent Engine Shutdown
3508C, 3512C and 3516C Locomotive Engines Exhaust Manifold
C6.6 Marine Generator Set Diagnostic Code Cross Reference