Gasket for the Turbocharger and Exhaust Manifold for 3056, 3056E and C6.6 Engines {1052, 7555}
- Industrial Engine:
- 3056 (S/N: 1ML1-UP)
- Generator Set:
- 3056 (S/N: 7AK1-UP)
- 3056 (S/N: 7MS1-UP)
- 3056E (S/N: 3561-UP)
- C6.6 (S/N: 6661-UP)
- 3056 (S/N: 3GW1-UP)
- C6.6 (S/N: MRW1-UP; SDA1-UP; N6D1-UP)
Show/hide table
 | |
| Illustration 1 | g02009413 |
Typical example | |
The 141-8589 Gasket (1) that is located between the turbocharger and the exhaust manifold is no longer installed for production.
If the turbocharger is removed from the exhaust manifold, the 141-8589 Gasket should be installed. For the correct procedure to install the gasket, refer to Disassembly and Assembly, "Turbocharger - Install".
Caterpillar Information System:
2009/10/23 Improved Assembly for the Alternator Bracket on 3054C, 3054E and C4.4Engines {1405}
C7.1 Industrial Engine and Generator Set Motorized Valve - Test
3516C HD Generator Set with Gearbox Declaration of Conformity
3512C HD SR500 Generator Sets Sound Information
3508B, 3512B, and 3516B High Displacement Generator Sets Stator Winding Temperature - Test
CX31-P600 Petroleum Transmission Torque Converter
770 and 772 Off-Highway Truck Parking
C175-16 Marine Engines Fuel System Primary Filter - Clean/Inspect/Replace
3508B, 3512B, and 3516B High Displacement Generator Sets Rotating Rectifier - Inspect/Test
C15 and C18 Petroleum Generator Sets Space Heater - Test
2009/10/15 New Software is Now Used for the Product Link PL121SR and PL321SR Systems {7606, 7620}
G3512E and G3520E Generator Set Engines Engine Speed/Timing Sensor
C13 Industrial Engines Engine Oil Filter Base
797F and 797F XQ Off-Highway Truck/Tractor Braking System Gear Motor (Rear Axle Oil Cooler Fan)
793F Off-Highway Truck Machine Systems Transmission Control - Remove and Install
PM3516 Power Modules Sound Information
PM3516 Power Modules Declaration of Conformity
PM3516 Power Modules Generator Set Installation
C7.1 Industrial Engine and Generator Set Diesel Particulate Filter Identification Signal - Test
349F and 352F Excavators Machine System Specifications Rollover Protective Structure (ROPS) Mounting
Troubleshooting Cycling of the Engine Cooling Fan{1353, 1356, 1359, 1901, 5061} Troubleshooting Cycling of the Engine Cooling Fan{1353, 1356, 1359, 1901, 5061}
349F and 352F Excavators Rollover Protective Structure (ROPS) - Inspect
CX31-P600 Petroleum Transmission General Information
C13 and C15 On-highway Engines ARD Nozzle Heater - Test