Sensors and Electrical Connectors
Show/hide table
Connector     | Function     |
---|---|
J1/P1     | Electronic Control Module (ECM) connectors     |
J2/P2     | ECM connectors     |
J42     | Service tool connector (customer supplied)     |
J57/P57     | J1939 Terminating resistor (customer installed component)     |
J60     | Service tool connector (Caterpillar supplied)     |
J61/P61     | Customer connector     |
J67/P67     | J1939 Terminating resistor (Caterpillar installed)     |
J71/P71     | Marine Power Display     |
J94/P94     | Marine Engine Control Panel     |
J100/P100     | Engine coolant temperature sensor     |
J103/P103     | Inlet manifold air temperature sensor     |
J105/P105     | Fuel temperature sensor     |
J137/P137     | Transmission oil temperature sensor     |
J145/P145     | Fuel outlet temperature sensor ( C18 Only)     |
J200/P200     | Turbocharger outlet pressure sensor     |
J201/P201     | Engine oil pressure sensor     |
J209/P209     | Fuel pressure sensor     |
J212/P212     | Transmission oil pressure sensor     |
J300/P300     | Injector valve cover entry connector     |
P400     | Timing Calibration (TC) probe connector     |
J401/P401     | Primary engine speed/timing sensor     |
J402/P402     | Secondary engine speed/timing sensor     |
J403/P403     | Primary throttle position sensor     |
J404/P404     | Secondary throttle position sensor     |
J800/P800     | Engine coolant level sensor     |
Show/hide table
Illustration 1 | g01153727 |
Block diagram |
Show/hide table
Illustration 2 | g01154016 |
C-18 component locations (typical example) (1) Engine coolant temperature sensor (2) Turbocharger outlet pressure sensor (3) J61 Customer connector (4) J63 Service tool connector (5) P300 Valve cover connector (6) Fuel temperature sensor (7) P400 Timing calibration connector (8) Intake manifold air temperature sensor (9) Connector for the transmission oil pressure sensor (10) Connector for the transmission oil temperature sensor (11) Primary engine speed/timing sensor (12) Secondary engine speed/timing sensor (13) Fuel presssure sensor (14) Atmospheric pressure sensor (15) Engine oil pressure sensor (16) ECM (17) J2 ECM connector (18) J1 ECM connector |
Caterpillar Information System:
G3512E and G3520E Generator Set Engines Circuit Breaker
G3512 Generator Set Engines Power Supply
3508, 3512 and 3516 Generator Set Engines Aftercooler - Remove and Install
C32 Petroleum Generator Sets Declaration of Conformity
C32 Petroleum Generator Sets Sound Information
C13 and C15 On-highway Engines Fuel System Pressure - Test
CX31-P600 Petroleum Transmission Torque Converter Housing - Integral Pump Drive, Retarder
797F and 797F XQ Off-Highway Truck/Tractor Braking System Parking Brake Release Pressure - Test
CX31-P600 Petroleum Transmission Drive Plate - Flywheel) (C9 - C13 Engines
2009/11/18 Changes To Caterpillar Incident Reporting Field Use Form And DSN Incident Report Entry Screens {1000, 7000}
797F and 797F XQ Off-Highway Truck/Tractor Braking System Brake Accumulator System Recovery - Test
797F and 797F XQ Off-Highway Truck/Tractor Braking System Relief Valve (Main) - Test and Adjust
G3512E and G3520E Generator Set Engines Engine Speed/Timing Sensor
2009/10/15 New Software is Now Used for the Product Link PL121SR and PL321SR Systems {7606, 7620}
C15 and C18 Petroleum Generator Sets Space Heater - Test
3508B, 3512B, and 3516B High Displacement Generator Sets Rotating Rectifier - Inspect/Test
C175-16 Marine Engines Fuel System Primary Filter - Clean/Inspect/Replace
770 and 772 Off-Highway Truck Parking
CX31-P600 Petroleum Transmission Torque Converter
3508B, 3512B, and 3516B High Displacement Generator Sets Stator Winding Temperature - Test
3512C HD SR500 Generator Sets Sound Information
3516C HD Generator Set with Gearbox Declaration of Conformity
C7.1 Industrial Engine and Generator Set Motorized Valve - Test
2009/10/23 Improved Assembly for the Alternator Bracket on 3054C, 3054E and C4.4Engines {1405}