C13 Industrial Engines Caterpillar


Camshaft

Usage:

C13 KWJ


Illustration 1g02306674
(1) Camshaft gear

(A) Diameter of camshaft bearing journal ... 77.850 ± 0.025 mm (3.0650 ± 0.0010 inch)

The lobe on the camshaft for the injector has the most lift when the cam is at zero degrees of rotation. ... 14.21529 ± 0.1 mm (0.55966 ± 0.00394 inch)

The lobe on the camshaft for the injector has zero lift through the given rotation. ... 77 degrees to 256 degrees

When the injector lobe has an opening lift height of 5.01167 ± 0.038 mm (0.19731 ± 0.00150 inch), the camshaft should have an angle of rotation. ... 35 degrees

The lobe on the camshaft for the inlet has the most lift when the cam is at zero degrees of rotation. ... 12.60667 ± 0.1 mm (0.49632 ± 0.00394 inch)

The lobe on the camshaft for the inlet has zero lift through the given rotation. ... 78 degrees to 284 degrees

When the inlet lobe has an opening lift height of 5.13544 ± 0.2 mm (0.20218 ± 0.00787 inch), the camshaft should have an angle of rotation. ... 32 degrees

The lobe on the camshaft for the exhaust has the most lift when the cam is at zero degrees of rotation. ... 9.41655 ± 0.1 mm (0.37073 ± 0.00394 inch)

The lobe on the camshaft for the exhaust has zero lift through the given rotation. ... 83 degrees to 278 degrees

When the exhaust lobe has an opening lift height of 5.56895 ± 0.2 mm (0.21925 ± 0.00787 inch), the camshaft should have an angle of rotation. ... 32 degrees



Illustration 2g02266638

(2) The torque on the four bolts is ... 35 ± 8 N·m (26 ± 6 lb ft)

Caterpillar Information System:

349F and 352F Excavators Hydraulic System Pump Control (Negative Flow) - Adjust
797F and 797F XQ Off-Highway Trucks Torque Converter Sump Oil Level - Check
325D and 329D Excavators Hydraulic System Swing Bearing Movement - Measure
CX31-P600 Petroleum Transmission Coupling Fastener - Flywheel) (C9 - C13 Engines
797F and 797F XQ Off-Highway Trucks Torque Converter and Transmission Oil Sample - Obtain
349F and 352F Excavators Hydraulic System Accumulator (Pilot) - Test and Charge
797F and 797F XQ Off-Highway Truck/Tractor Braking System Motor Rotating Group (Brake Cooling) - Adjust
793F Off-Highway Truck Machine Systems Traction Control Valve - Assemble
G3512E and G3520E Generator Set Engines Integrated Temperature Sensing Module
797F and 797F XQ Off-Highway Trucks Torque Converter Outlet and Sump Screens - Clean
797F and 797F XQ Off-Highway Trucks Torque Converter Oil Filter - Replace
797F and 797F XQ Off-Highway Trucks Transmission Magnetic Screen - Clean
CX31-P600 Petroleum Transmission Drive Plate - Flywheel) (C15 - C18 Engines
797F and 797F XQ Off-Highway Truck/Tractor Braking System Relief Valve (Main) - Test and Adjust
797F and 797F XQ Off-Highway Truck/Tractor Braking System Brake Accumulator System Recovery - Test
2009/11/18 Changes To Caterpillar Incident Reporting Field Use Form And DSN Incident Report Entry Screens {1000, 7000}
CX31-P600 Petroleum Transmission Drive Plate - Flywheel) (C9 - C13 Engines
797F and 797F XQ Off-Highway Truck/Tractor Braking System Parking Brake Release Pressure - Test
CX31-P600 Petroleum Transmission Torque Converter Housing - Integral Pump Drive, Retarder
C13 and C15 On-highway Engines Fuel System Pressure - Test
C32 Petroleum Generator Sets Sound Information
C32 Petroleum Generator Sets Declaration of Conformity
3508, 3512 and 3516 Generator Set Engines Aftercooler - Remove and Install
G3512 Generator Set Engines Power Supply
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.