An Improved Rod for the Recoil Spring is Now Used {4158}
- Excavator:
- 323D (S/N: SED1-UP; DKW1-UP)
- Mobile Hydraulic Power Unit:
- 325D MHPU (S/N: SRC1-UP; C3N1-UP)
- 324D (S/N: JKR1-UP; JLS1-UP)
- 325D (S/N: GPB1-UP; NAC1-UP; PKE1-UP; ERK1-UP; LAL1-UP; PAL1-UP; A3R1-UP; GBR1-UP; T2S1-UP)
- 329D (S/N: JHJ1-UP; RSK1-UP)
- UNDERCARRIAGE (S/N: L5J1-UP)
Description of Change: An improved rod for the recoil spring is now used. The improved rod has a new machining process in order to make the rod more reliable. The new process ensures a consistent depth of the hole for the M12 bolt thread. The machining process eliminates the possibility of the rod from breaking.
Adaptable To: The improved 194-1245 Rod replaces the former 194-1245 Rod. Refer to Table 1 for the effectivity of the improved machining process.
Show/hide table
Effectivity of the Improved Machining Process     | ||
---|---|---|
Model     | Effectivity     | Adaptability     |
323D     | S/N:SED421-UP     | S/N:SED1-420     |
S/N:DKW335-UP | S/N:DKW1-334     | |
324D     | S/N:JKR1207-UP     | S/N:JKR1-1206     |
S/N:JLS1304-UP | S/N:JLS1-1303     | |
325D     |
S/N:GPB1121-UP     | S/N:GPB1-1120     |
S/N:NAC277-UP | S/N:NAC1-276     | |
S/N:PKE1204-UP | S/N:PKE1-1203     | |
S/N:ERK233-UP | S/N:ERK1-232     | |
S/N:LAL527-UP | S/N:LAL1-526     | |
S/N:PAL466-UP | S/N:PAL1-465     | |
S/N:A3R1437-UP | S/N:A3R1-1436     | |
S/N:GBR192-UP | S/N:GBR1-191     | |
S/N:T2S402-UP | S/N:T2S1-401     | |
329D     | S/N:JHJ324-UP     | S/N:JHJ1-323     |
S/N:RSK160-UP | S/N:RSK1-159     | |
Undercarriage     | S/N:L5J60056-UP     | S/N:L5J1-60055     |
325D MHPU     | S/N:SRC107-UP     | S/N:SRC1-106     |
S/N:C3N567-UP | S/N:C3N1-566     |
Caterpillar Information System:
795F AC and 795F AC XQ Off-Highway Trucks Air Filter Element (Inverter Cabinet) - Check
C9.3 Engines for Caterpillar Built Machines Customer Passwords
120 and 120 AWD Motor Grader Ether Starting Aid Cylinder - Replace
C13, C15, and C18 Generator Set Engines Belt Tightener
3500B and 3500C Marine Engines Alternator and Regulator
Adjustment of Overload Protection for Generators{4450, 4493} Adjustment of Overload Protection for Generators{4450, 4493}
C15 and C18 Industrial Engines Pressure Sensor (DPF) - Remove and Install
C7.1 Industrial Engine Electrical System
2009/04/27 Proper Long Term Storage of Caterpillar Products {0355, 1000, 7000}
C13, C15, and C18 Tier 4 Interim Engines ECM - Replace
C15 and C18 Industrial Engines Temperature Sensor (DPF) - Remove and Install - Clean Emissions Module
C175 Generator Sets System Pressure Release
2009/04/20 How Is Service Information Accessed / Used {0374, 1000, 7000}
C15 and C18 Industrial Engines Flame Detection Temperature Sensor - Remove and Install - Clean Emissions Module
PM3516 Power Modules Fumes Disposal Filter - Drain
793F and 797F Off-Highway Trucks Chassis Electronic Control System MID 087 - CID 0800 - FMI 09
C18 Marine Generator Set Configuration Parameters
C13 Tier 4 Final Engines Lubrication System
2009/05/04 A Repair Kit for the Magnet is Now Available for the AccuGrade CD700 Display {7490}
789D, 793F, and 797F Off-Highway Truck Monitoring System Connector Contact Description
C7.1 Industrial Engine and Generator Set No Diagnostic Codes Detected
C7.1 Industrial Engine and Generator Set Analog Throttle Position Sensor Circuit - Test
C13, C15, and C18 Tier 4 Final Engines Turbocharger
C11 and C13 Industrial Engines Turbocharger