Alternator - Remove and Install
Removal Procedure
- Disconnect the battery cables from the battery. Refer to Operation and Maintenance Manual, "Battery or Battery Calbes - Disconnect".
- Remove the drive belt.
- Place an index mark on all harness assemblies that are connected to alternator (1). Disconnect all harness assemblies from alternator (1) .
Show/hide table
Illustration 1 | g01128834 |
- Remove bolts (2) .
- Remove alternator (1) .
Installation Procedure
- Position alternator (1) on the mounting bracket. Install bolts (2) .
Show/hide table
Illustration 2 | g01128834 |
- Install the drive belt.
- Connect all harness assemblies to alternator (1). Use the index marks to correctly connect the harness assemblies.
- Connect the battery cables to the battery. Refer to Operation and Maintenance Manual, "Battery or Battery Calbes - Disconnect".
Caterpillar Information System:
C7 Engine for Combat and Tactical Vehicles Engine Control Module - Remove and Install
C7 Engine for Combat and Tactical Vehicles Fan Drive Mounting Group - Remove and Install
C7 Engine for Combat and Tactical Vehicles Inlet Air Temperature Sensor - Remove and Install
C7 Engine for Combat and Tactical Vehicles Boost Pressure Sensor - Remove and Install
C7 Engine for Combat and Tactical Vehicles Speed/Timing Sensor - Remove and Install
C7 Engine for Combat and Tactical Vehicles Injection Actuation Pressure Sensor - Remove and Install
C7 Engine for Combat and Tactical Vehicles Engine Oil Pressure Sensor - Remove and Install
C7 Engine for Combat and Tactical Vehicles Coolant Temperature Sensor - Remove and Install
C7 Engine for Combat and Tactical Vehicles Atmospheric Pressure Sensor - Remove and Install
C9 Marine Auxiliary and Generator Set Engines Emissions Certification Film
C7 Engine for Combat and Tactical Vehicles Bearing Clearance - Check
C7 Engine for Combat and Tactical Vehicles Crankshaft Gear - Remove and Install
C7 Engine for Combat and Tactical Vehicles Electric Starting Motor - Remove and Install
C7 Engine for Combat and Tactical Vehicles Air Compressor - Remove and Install
C7 Engine for Combat and Tactical Vehicles Air Compressor Drive Gear - Remove
C7 Engine for Combat and Tactical Vehicles Air Compressor Drive Gear - Install
C175 Generator Sets System Pressure Release
C15 and C18 Industrial Engines Temperature Sensor (DPF) - Remove and Install - Clean Emissions Module
C13, C15, and C18 Tier 4 Interim Engines ECM - Replace
2009/04/27 Proper Long Term Storage of Caterpillar Products {0355, 1000, 7000}
C7.1 Industrial Engine Electrical System
C15 and C18 Industrial Engines Pressure Sensor (DPF) - Remove and Install
Adjustment of Overload Protection for Generators{4450, 4493} Adjustment of Overload Protection for Generators{4450, 4493}
3500B and 3500C Marine Engines Alternator and Regulator