Fan Drive Mounting Group - Remove and Install
Removal Procedure
Start By:
- Remove the alternator. Refer to Disassembly and Assembly, "Alternator - Remove and Install".
One-Piece Fan Drive Mounting (If Equipped)
Show/hide table
Illustration 1 | g01128363 |
- Remove screws (1) .
- Remove bolts (2) .
- Remove bolts (3) .
- Remove fan drive mounting (4) .
Two-Piece Fan Drive Mounting (If Equipped)
Show/hide table
Illustration 2 | g01128365 |
- Remove bolts (5) and bolts (10). Remove support assembly (9) .
- Remove screws (6) .
- Remove bolts (8) .
- Remove fan drive mounting (7) .
Installation Procedure
One-Piece Fan Drive Mounting (If Equipped)
Show/hide table
Illustration 3 | g01128363 |
- Position fan drive mounting (4) on the engine. Install bolts (2) and bolts (3). Tighten bolts (2) and bolts (3) finger tight.
- Tighten bolts (2) to a torque of 55 ± 10 N·m (40 ± 7 lb ft).
- Tighten bolts (3) to a torque of 28 ± 7 N·m (20 ± 5 lb ft).
- Install screws (1) .
Two-Piece Fan Drive Mounting (If Equipped)
Show/hide table
Illustration 4 | g01128365 |
- Position fan drive mounting (7) on the engine.
- Install bolts (8) and screws (6). Tighten bolts (8) and screws (6) finger tight.
- Position support assembly (9) on fan drive mounting (7) .
- Install bolts (5) and bolts (10). Tighten bolts (5) and bolts (10) finger tight.
- Tighten bolts (8) and screws (6) to standard torque.
- Tighten bolts (5) and bolts (10) to standard torque.
End By: Install the alternator. Refer to Disassembly and Assembly, "Alternator - Remove and Install".
Caterpillar Information System:
C7 Engine for Combat and Tactical Vehicles Inlet Air Temperature Sensor - Remove and Install
C7 Engine for Combat and Tactical Vehicles Boost Pressure Sensor - Remove and Install
C7 Engine for Combat and Tactical Vehicles Speed/Timing Sensor - Remove and Install
C7 Engine for Combat and Tactical Vehicles Injection Actuation Pressure Sensor - Remove and Install
C7 Engine for Combat and Tactical Vehicles Engine Oil Pressure Sensor - Remove and Install
C7 Engine for Combat and Tactical Vehicles Coolant Temperature Sensor - Remove and Install
C7 Engine for Combat and Tactical Vehicles Atmospheric Pressure Sensor - Remove and Install
C9 Marine Auxiliary and Generator Set Engines Emissions Certification Film
C7 Engine for Combat and Tactical Vehicles Bearing Clearance - Check
C7 Engine for Combat and Tactical Vehicles Crankshaft Gear - Remove and Install
C7 Engine for Combat and Tactical Vehicles Crankshaft - Install
C7 Engine for Combat and Tactical Vehicles Crankshaft - Remove
C7 Engine for Combat and Tactical Vehicles Engine Control Module - Remove and Install
C7 Engine for Combat and Tactical Vehicles Alternator - Remove and Install
C7 Engine for Combat and Tactical Vehicles Electric Starting Motor - Remove and Install
C7 Engine for Combat and Tactical Vehicles Air Compressor - Remove and Install
C7 Engine for Combat and Tactical Vehicles Air Compressor Drive Gear - Remove
C7 Engine for Combat and Tactical Vehicles Air Compressor Drive Gear - Install
C175 Generator Sets System Pressure Release
C15 and C18 Industrial Engines Temperature Sensor (DPF) - Remove and Install - Clean Emissions Module
C13, C15, and C18 Tier 4 Interim Engines ECM - Replace
2009/04/27 Proper Long Term Storage of Caterpillar Products {0355, 1000, 7000}
C7.1 Industrial Engine Electrical System
C15 and C18 Industrial Engines Pressure Sensor (DPF) - Remove and Install