Fuel Filter Base - Single Secondary Fuel Filter Base
Show/hide table
| NOTICE |
|---|
|
Refer to Systems Operation, Testing and Adjusting, "Cleanliness of Fuel System Components" for detailed information on the standards of cleanliness that must be observed during ALL work on the fuel system. |
If necessary, install a new fuel filter (2) to canister (1). Refer to Operation and Maintenance Manual, "Fuel System Secondary Filter - Replace" for the correct procedure.
Show/hide table
| |
| Illustration 1 | g02516539 |
|
Typical example | |
(3) Tighten the bolts to the following torque. ...
(4) Tighten the bolt to the following torque. ...
Show/hide table
| |
| Illustration 2 | g03396250 |
|
Typical example | |
(5) Tighten the screw to the following torque. ...
Caterpillar Information System:
C6.6 Industrial Engine Fuel Injection Pump
C7.1 Industrial Engine and Generator Set Indicator Lamps
C6.6 Industrial Engine Fuel Injection Lines
G3520B Engine Maintenance Interval Schedule
C32 Marine Engine Battery Problem
C13, C15, and C18 Tier 4 Interim Engines Alternator Problem - Charging Problem and/or Noisy Operation
C15 and C18 Industrial Engines Fumes Disposal Filter - Remove and Install
C6.6 Industrial Engine Atmospheric Pressure Sensor
Procedure to Flush the Fuel System for the Aftertreatment Regeneration Device (ARD){3206} Procedure to Flush the Fuel System for the Aftertreatment Regeneration Device (ARD){3206}
C9.3 Tier 4 Interim Engines Coolant Temperature Is Low
793F and 797F Off-Highway Trucks Power Train Electronic Control System Electronic Control Module (ECM) - Configure
C15 and C18 Engines for Caterpillar Built Machines Front Cover - Remove and Install
C13 Engine for Caterpillar Built Machines Inlet and Exhaust Valve Springs - Remove and Install
C6.6 Industrial Engine Lifter Group
C9.3 Tier 4 Interim Engines Engine Cranks but Does Not Start
C15 and C18 Engines for Caterpillar Built Machines Cylinder Head - Remove and Install
793F CMD Off-Highway Truck (Command for Hauling) Power Train Electronic Control System Backup Alarm Does Not Function
C12 Marine Engines Heat Exchanger - Inspect/Clean
793F and 797F Off-Highway Trucks Braking System Brakes Drag
C13 Engine for Caterpillar Built Machines Inlet and Exhaust Valves - Remove and Install
C13 Engine for Caterpillar Built Machines Inlet and Exhaust Valve Guides - Remove and Install
C13 Engine for Caterpillar Built Machines Inlet and Exhaust Valve Seat Inserts - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Engine Oil Pan - Remove and Install - C15 Engine
C13 Engines for Caterpillar Built Machines Exhaust Cooler (NRS) - Remove and Install