C6.6 Industrial Engine Caterpillar


Exhaust Cooler (NRS)

Usage:

C6.6 667
Note: When the pipes for the exhaust cooler are removed or installed, care must be taken so that the pipes are not bent or damaged.


Illustration 1g02295833
Typical example

(1) ( 2) Tighten the setscrews to the following torque. ... 22 N·m (195 lb in)



Illustration 2g02295755
Typical example

(3) ( 4) ( 6) ( 7) ( 9) Tighten the setscrews to the following torque. ... 22 N·m (195 lb in)

(5) ( 8) Tighten the setscrews to the following torque. ... 44 N·m (32 lb ft)

Caterpillar Information System:

C12 Marine Engines Emissions Certification Film
C15 and C18 Industrial Engines Inlet Air Temperature Sensor - Remove and Install
C12 Marine Engines Engine Speed/Timing Sensor - Clean/Inspect
2009/05/11 A New Wiring Harness for the Space Heater Is Used {1408, 664E}
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Magnetic Switch
C12 Marine Engines Fuel Injector - Inspect/Adjust
C11 and C13 Engines Fuel Pressure Sensor
C7.1 Engines for Caterpillar Built Machines Crankshaft
C13 Engine for Caterpillar Built Machines Valve Mechanism Cover Base - Remove and Install
C13 Engine for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
C4.4 Industrial Engine Fuel Injection Nozzles
C7.1 Engines for Caterpillar Built Machines Glow Plugs
2009/04/06 Improved Water Pump {1361}
C32 Marine Engine Coolant Contains Oil
C13 Engines for Caterpillar Built Machines Turbocharger - Remove and Install
C13, C15, and C18 Tier 4 Interim Engines Coolant Level Is Low
C13, C15, and C18 Tier 4 Interim Engines Coolant Temperature Is High
C13 Engines for Caterpillar Built Machines Exhaust Manifold - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Front Cover - Remove and Install
793F and 797F Off-Highway Trucks Power Train Electronic Control System Electronic Control Module (ECM) - Configure
C9.3 Tier 4 Interim Engines Coolant Temperature Is Low
Procedure to Flush the Fuel System for the Aftertreatment Regeneration Device (ARD){3206} Procedure to Flush the Fuel System for the Aftertreatment Regeneration Device (ARD){3206}
C6.6 Industrial Engine Atmospheric Pressure Sensor
C15 and C18 Industrial Engines Fumes Disposal Filter - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.