Inlet Air Temperature Sensor - Remove and Install
拆卸步骤
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 断开线束组件 (1) 。 拆下进气温度传感器 (2) 。
Show/hide table
图 1 | g01863364 |
安装步骤
- 按相反顺序安装进气温度传感器 (2) 。
- 将空气温度传感器 (2) 上紧到 20 ± 5 N·m (177 ± 44 lb in) 的扭矩。
Caterpillar Information System:
C12 Marine Engines Engine Speed/Timing Sensor - Clean/Inspect
2009/05/11 A New Wiring Harness for the Space Heater Is Used {1408, 664E}
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Magnetic Switch
C12 Marine Engines Fuel Injector - Inspect/Adjust
C11 and C13 Engines Fuel Pressure Sensor
C7.1 Engines for Caterpillar Built Machines Crankshaft
C13 Engine for Caterpillar Built Machines Valve Mechanism Cover Base - Remove and Install
C13 Engine for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
C4.4 Industrial Engine Fuel Injection Nozzles
C7.1 Engines for Caterpillar Built Machines Glow Plugs
C13 Engines for Caterpillar Built Machines Rocker Arm and Shaft - Install
C6.6 Industrial Engine Valve Mechanism Cover
C12 Marine Engines Emissions Certification Film
C6.6 Industrial Engine Exhaust Cooler (NRS)
2009/04/06 Improved Water Pump {1361}
C32 Marine Engine Coolant Contains Oil
C13 Engines for Caterpillar Built Machines Turbocharger - Remove and Install
C13, C15, and C18 Tier 4 Interim Engines Coolant Level Is Low
C13, C15, and C18 Tier 4 Interim Engines Coolant Temperature Is High
C13 Engines for Caterpillar Built Machines Exhaust Manifold - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Front Cover - Remove and Install
793F and 797F Off-Highway Trucks Power Train Electronic Control System Electronic Control Module (ECM) - Configure
C9.3 Tier 4 Interim Engines Coolant Temperature Is Low
Procedure to Flush the Fuel System for the Aftertreatment Regeneration Device (ARD){3206} Procedure to Flush the Fuel System for the Aftertreatment Regeneration Device (ARD){3206}