Vibration Damper and Pulley
Show/hide table
| |
| Illustration 1 | g02282353 |
|
Typical example | |
(1) Tighten the setscrews for the adapter to the following torque. ...
The setscrews must be tightened through an angle of 120 degrees.
(2) Tighten the bolts for the damper and pulley to the following torque. ...
(3) Vibration damper
(4) Crankshaft pulley
(5) Crankshaft adapter
Caterpillar Information System:
C7.1 Industrial Engine and Generator Set System Overview
C7.1 Industrial Engine and Generator Set Glossary
3500 Industrial Engines Exhaust Flange
C13 Engines for Caterpillar Built Machines Engine Oil Filter Base - Remove and Install
C13 Engine for Caterpillar Built Machines Engine Oil Cooler - Remove and Install
C175-16 Locomotive Engine Engine Misfires, Runs Rough or Is Unstable
G3500 Generator Sets Crankshaft Vibration Damper - Inspect - 1500 RPM G3520 engines (if equipped with an oil fed damper)
Using the Air Compressor Unloader Kit for On-Highway Engines{1803} Using the Air Compressor Unloader Kit for On-Highway Engines{1803}
Storage Procedure for Caterpillar Products {0355, 1000, 7000} Storage Procedure for Caterpillar Products {0355, 1000, 7000}
2009/05/11 A New Gasket Improves the Sealing between the Exhaust Manifold and the Cylinder Head on Some 3500 Machine Engines {1100}
725C2, 730C2 Articulated Truck LRC Engine Supplement Engine Oil Pump - Assemble
725C2, 730C2 Articulated Truck LRC Engine Supplement Engine Oil Pump - Disassemble
C13 Engines for Caterpillar Built Machines Engine Oil Filter Base - Disassemble
C6.6 Industrial Engine Camshaft Bearings
C13 Engines for Caterpillar Built Machines Engine Oil Filter Base - Assemble
CX35-P800 Petroleum Transmission and Petroleum Power Train Packages Modulating Valve (Transmission Clutch) - Remove and Install
CX31-P600 Petroleum Transmission Well Servicing Modulating Valve (Transmission Clutch) - Remove and Install
C6.6 Industrial Engine Boost Pressure Sensor
C13 Engine for Caterpillar Built Machines Fuel Pressure Regulator - Remove and Install
C9.3 Engines for Caterpillar Built Machines Oil Pressure Is Low
C9.3 Tier 4 Interim Engines Oil Contains Fuel
C13 Engine for Caterpillar Built Machines Electronic Unit Injector Sleeve - Remove and Install
C6.6 Industrial Engine Front Housing and Covers
C7.1 Industrial Engine Turbocharger - Series Turbochargers