Engine Oil Pump - Assemble
- Install shaft assemblies (5) in body (4).
- Install O-ring seal (6), cover (7), and bolts (8). Install O-ring seal (3) on body (4).
Show/hide table
Illustration 2 g01857656 Show/hide table
Illustration 3 g01857675 - Use a suitable press to install gear (1) onto engine oil pump (2).
Note: Install gear (1) to Dimension (X). Dimension (X) is
29.4 ± 0.5 mm (1.16 ± 0.02 inch) .
Show/hide table
| |
| Illustration 1 | g01857555 |
End By:
- Install the engine oil pump.
Caterpillar Information System:
725C2, 730C2 Articulated Truck LRC Engine Supplement Engine Oil Pump - Disassemble
2009/03/23 Setting the Trip Point for High Boost Pressure {1901, 1920}
C6.6 Industrial Engine Engine Oil Pan
C13 Engine for Caterpillar Built Machines Engine Oil Pump - Remove and Install
C13 Engines for Caterpillar Built Machines Water Pump - Remove and Install
2009/03/01 An Improved Cylinder Pack Is Now Available for 3406E, C15 and C-15 On-Highway Truck Engines with High Load Applications {1225, 1239}
C13 Engines for Caterpillar Built Machines Water Temperature Regulator - Remove and Install
Replacement Tube Assembly{1261, 1274} Replacement Tube Assembly{1261, 1274}
C13 Engines for Caterpillar Built Machines Electronic Unit Injector - Remove and Install
Replacement Tube Assembly{1261, 1274} Replacement Tube Assembly{1261, 1274}
C6.6 Industrial Engine Speed/Timing Sensor
C7.1 Engines for Caterpillar Built Machines Engine Oil Cooler
2009/05/11 A New Gasket Improves the Sealing between the Exhaust Manifold and the Cylinder Head on Some 3500 Machine Engines {1100}
Storage Procedure for Caterpillar Products {0355, 1000, 7000} Storage Procedure for Caterpillar Products {0355, 1000, 7000}
Using the Air Compressor Unloader Kit for On-Highway Engines{1803} Using the Air Compressor Unloader Kit for On-Highway Engines{1803}
G3500 Generator Sets Crankshaft Vibration Damper - Inspect - 1500 RPM G3520 engines (if equipped with an oil fed damper)
C175-16 Locomotive Engine Engine Misfires, Runs Rough or Is Unstable
C13 Engine for Caterpillar Built Machines Engine Oil Cooler - Remove and Install
C13 Engines for Caterpillar Built Machines Engine Oil Filter Base - Remove and Install
3500 Industrial Engines Exhaust Flange
C7.1 Industrial Engine and Generator Set Glossary
C7.1 Industrial Engine and Generator Set System Overview
C7.1 Engines for Caterpillar Built Machines Vibration Damper and Pulley
C13 Engines for Caterpillar Built Machines Engine Oil Filter Base - Disassemble