725C2, 730C2 Articulated Truck LRC Engine Supplement Caterpillar


Engine Oil Pump - Disassemble

Usage:

730C2 2L7

Disassembly Procedure

Table 1
Required Tools 
Tool  Part Number  Part Description  Qty 
8B-7551  Bearing Puller Gp 
126-7175 Push-Puller Tool Gp 

Start By:

  1. Remove the engine oil pump.


    Illustration 1g01857554

  1. Use Tooling (A) to remove gear (1) from engine oil pump (2).


    Illustration 2g01857555

  2. Remove O-ring seal (3) from body (4). Remove bolts (8), cover (7), and O-ring seal (6).

  3. Remove shaft assemblies (5) from body (4).

Caterpillar Information System:

2009/03/23 Setting the Trip Point for High Boost Pressure {1901, 1920}
C6.6 Industrial Engine Engine Oil Pan
C13 Engine for Caterpillar Built Machines Engine Oil Pump - Remove and Install
C13 Engines for Caterpillar Built Machines Water Pump - Remove and Install
2009/03/01 An Improved Cylinder Pack Is Now Available for 3406E, C15 and C-15 On-Highway Truck Engines with High Load Applications {1225, 1239}
C13 Engines for Caterpillar Built Machines Water Temperature Regulator - Remove and Install
Replacement Tube Assembly{1261, 1274} Replacement Tube Assembly{1261, 1274}
C13 Engines for Caterpillar Built Machines Electronic Unit Injector - Remove and Install
Replacement Tube Assembly{1261, 1274} Replacement Tube Assembly{1261, 1274}
C6.6 Industrial Engine Speed/Timing Sensor
C7.1 Engines for Caterpillar Built Machines Engine Oil Cooler
2009/07/06 New Main Control Valves are Now Available {5051}
725C2, 730C2 Articulated Truck LRC Engine Supplement Engine Oil Pump - Assemble
2009/05/11 A New Gasket Improves the Sealing between the Exhaust Manifold and the Cylinder Head on Some 3500 Machine Engines {1100}
Storage Procedure for Caterpillar Products {0355, 1000, 7000} Storage Procedure for Caterpillar Products {0355, 1000, 7000}
Using the Air Compressor Unloader Kit for On-Highway Engines{1803} Using the Air Compressor Unloader Kit for On-Highway Engines{1803}
G3500 Generator Sets Crankshaft Vibration Damper - Inspect - 1500 RPM G3520 engines (if equipped with an oil fed damper)
C175-16 Locomotive Engine Engine Misfires, Runs Rough or Is Unstable
C13 Engine for Caterpillar Built Machines Engine Oil Cooler - Remove and Install
C13 Engines for Caterpillar Built Machines Engine Oil Filter Base - Remove and Install
3500 Industrial Engines Exhaust Flange
C7.1 Industrial Engine and Generator Set Glossary
C7.1 Industrial Engine and Generator Set System Overview
C7.1 Engines for Caterpillar Built Machines Vibration Damper and Pulley
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.