2008/12/01 Caterpillar


Calibration Fluid for Fuel Nozzle Test Equipment Is Available {1252, 1254}

Usage:

769C 01X
Caterpillar Products:
  • All
  • Service Magazine SEBD1221, 31 May 1982, "Calibration Fluid For Fuel Injection Test Equipment Available". Disregard the article. Refer to the information below.

    This calibration fluid is available in two different containers. The fluids are recommended for use with the 5P-4150 Nozzle Testing Group .

    The 5P-4150 Nozzle Testing Group is used for the bench testing of a fuel nozzle only after the nozzle has been tested in the engine and the performance of the nozzle is questionable.

    Caterpillar Information System:

    2008/12/01 The Delivery Inspection Checklist is Now in the Petroleum Transmission Operation and Maintenance Manuals {3030}
    3408E and 3412E Engines for Caterpillar Built Machines Oil Contains Fuel
    2010/03/22 New Software Is Available for Some C13 and C15 On-Highway Engines {1901, 1920}
    R438 Voltage Regulator Droop - Adjust
    Replacement of the Capacitors and the Inverters on the UPS{4480, 7451} Replacement of the Capacitors and the Inverters on the UPS{4480, 7451}
    2008/12/08 Do not Use the 1U-6661 Pop Tester Gp to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
    R438 Voltage Regulator Excitation Current Limit - Adjust
    C18 Industrial Engine Exhaust Temperature Is High
    C9 Engines for Motor Graders Coolant Contains Fuel
    2008/12/01 Do not Use the 1U-6661 Pop Tester Gp to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
    2008/12/01 New Software Is Available for Some C27 and C32 Generator Set Engines {1901, 1920}
    C18 Industrial Engine Exhaust Has Excessive White Smoke
    C32 Marine Engine Overhaul (Major)
    CX35-P800 Petroleum Transmission Safety Messages
    C18 Industrial Engine Oil Pressure Is Low
    C18 Industrial Engine Oil Temperature Is High
    2009/03/09 Improved Wire Assemblies for the Combustion Sensors Are Used {1408, 1563}
    CX35-P800 Petroleum Transmission Specifications
    CX35-P800 Petroleum Transmission Plate Locations and Film Locations
    C18 Industrial Engine Power Is Intermittently Low or Power Cutout Is Intermittent
    CX35-P800 Petroleum Transmission Transmission Warm-up
    CX35-P800 Petroleum Transmission Transmission Control
    CX35-P800 Petroleum Transmission Lifting and Tying Down the Transmission
    CX35-P800 Petroleum Transmission Transmission Cooling System
    Back to top
    The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
    CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.