Supplemental Parts Information for the USN Seabee CB534D{1000, 7000, 7567} Caterpillar


Supplemental Parts Information for the USN Seabee CB534D{1000, 7000, 7567}

Usage:

CB-534D FGH
Paving Compactor:
CB-534D (S/N: FGH781-782,784-785,787,789)

Introduction




Illustration 1g01051135

This Special Instruction for the USN Seabee CB534D Vibratory Compactor is a supplement to the commercial parts manual,, KEBP0242. The specific machine configuration is identified in the following tables with the additional parts identification that is required.

Parts Information

Table 1
MERCHANDISING AR    
318-8573 MERCHANDISING AR    
NOTE                     PART NAME     TABLE    
REF NMBR ILLUS NMBR     PRT NMBR     QTY     1     2     3     4     5     6     (Product Level)    
            189-9250     1     Flood Lighting Gp      (1)    
            190-0105     1     Water Mat and Mounting      (1)    
            198-6776     1     Hitch Ar      (1)    
            202-2631     1     Operator Ar      (1)    
            207-5362     1     Power Train Ar      (1)    
            210-1088     1     General Ar      (1)    
            222-9884     1     Vibratory Hydraulic Ar      (1)    
            225-3156     1     Rear View Mirror Gp      (1)    
            276-2530     1     Water Nozzle Group      (1)    
            318-8572     1     Conversion Ar     2    
   
( 1 ) Refer to Parts Manual, KEBP0242.

318-8572 Conversion Ar

Table 2
318-8572 CONVERSION AR    
NOTE                     PART NAME     TABLE    
REF NMBR ILLUS NMBR     PRT NMBR     QTY     1     2     3     4     5     6     (Product Level)    
            318-8472     1     Mtg Gp-Rifle     3    
            318-8571     1     Switch As-Start     5    
            318-8584     1     Paint Gp-TFR     6    
            318-8598     1     Film Gp     7    
   

318-8472 Mtg Gp-Rifle

Table 3
318-8472 MTG GP-RIFLE    
NOTE                     PART NAME     TABLE    
REF NMBR ILLUS NMBR     PRT NMBR     QTY     1     2     3     4     5     6     (Product Level)    
    1     2     039-228     4     Spacer        
    2     2     245-0772     1     Mounting Bracket Gp     4    
    3     2     318-8471     2     Plate        
    4     2     4D-7388     4     Clip        
    5     2     5P-7970     8     Nut        
    6     2     6V-5217     4     Bolt        
    7     2     8T-0100     4     Bolt        
    8     2     9M-1974     12     Hard Washer        



Illustration 2g01714254

245-0772 Mounting Bracket Gp

Table 4
245-0772 Mounting Bracket Gp    
NOTE                     PART NAME     TABLE    
REF NMBR ILLUS NMBR     PRT NMBR     QTY     1     2     3     4     5     6     (Product Level)    
    1     3     245-0768     1     Bracket As        
    2     3     245-1106     1     Bracket        
    3     3     245-1107     1     Bracket        
    4     3     245-1108     1     Bracket        
    5     3     245-1109     1     Latch As        
    6     3     5C-9553     2     Bolt        
    7     3     8T-4971     2     Bolt        
    8     3     9X-8256     4     Washer        



Illustration 3g01940515

318-8571 Start Switch

Table 5
318-8571 START SWITCH    
NOTE                     PART NAME     TABLE    
REF NMBR ILLUS NMBR     PRT NMBR     QTY     1     2     3     4     5     6     (Product Level)    
    1     4     318-8569     1     Start Switch As        
    2     4     318-9463     1     Wire As        
   



Illustration 4g01714735

318-8584 TFR Paint Gp

Table 6
318-8584 TFR PAINT GP    
NOTE                     PART NAME     TABLE    
REF NMBR ILLUS NMBR     PRT NMBR     QTY     1     2     3     4     5     6     (Product Level)    
    1     5     1P-2807     4     Film        
    2     5     5P-8501     1     Padlock        
    3     5     7X-7644     4     Film        
    4     5     135-8013     1     Antifreeze Tag        
    5     5     159-7297         Film      (1)    
    6     5     159-8033     1     Film      (2)    
    7     5     208-5133     1     Film      (3)    
    8     5     214-1737     4     Film        
    9     5     224-8945     1     Film        
    10     5     225-4256     1     Film        
    11     5     235-8029     4     Film        
    12     5     283-4321     1     Film        
    13     5     287-6935     1     Film        
    14     5     318-8574     2     Reg No Stencil      (4)    
    15     5     3E-8100     2 L     Paint      (5)    
    16     5     311-9286     14 L     Green Paint      (5)    
    17     5     8T-0555     2 L     Paint      (5)    
    18     5     069-2841     14 L     Paint      (5)    
    19     5     6V-0317     1 L     Paint      (5)    
( 1 ) Locate the film on the center of the frame 20 mm (0.78740 inch) under the cutout.
( 2 ) Attach the film below the jump stud that is under the hood.
( 3 ) Locate the film on the inside of the fuse cover.
( 4 ) Locate one on each side of the platform and use no gloss black paint.
( 5 ) NOT SHOWN



Illustration 5g01715213

(B) Red paint must be applied to the right and left side of the lock pin bracket.

(F) Located on far outside frame wall

318-8598 Film Gp

Table 7
318-8598 FILM GP    
NOTE                     PART NAME     TABLE    
REF NMBR ILLUS NMBR     PRT NMBR     QTY     1     2     3     4     5     6     (Product Level)    
    1     6     316-9828     2     Film        
    2     6     318-8591     2     Caterpillar Film      (1)    
   
( 1 ) Place Film-Caterpillar above bottom edge of the plate and center between lights, front, and rear of machine ±5



Illustration 6g01717593

Caterpillar Information System:

C27 Engine for the AD55B Underground Articulated Truck Coolant Flow - Test
120K Motor Grader Equipment Lowering with Engine Stopped
2008/11/03 An Instruction Film is No Longer Used on Certain Asphalt Screeds {1408, 7405}
785D OEM Off-Highway Truck Power Train Final Drive - Assemble
785D OEM Off-Highway Truck Power Train Final Drive - Disassemble
CS54 and CP54 Vibratory Soil Compactors Hydraulic System Oil Filter - Replace
24M Motor Grader Assembly Instruction (Split Shipping Configuration){7000, 7960} 24M Motor Grader Assembly Instruction (Split Shipping Configuration){7000, 7960}
12K, 140K and 160K Motor Graders Circle Drive Oil - Change
C27 Engine for the AD55B Underground Articulated Truck Cooling Fan Speed - Test
120K Motor Grader Hydraulic System Oil Level - Check
CB54, CB54 XW and CB64 Vibratory Compactor Machine Systems Smooth Drum Scraper
AccuGrade® GPS (CD700) Horizontal Guidance
834H Wheel Dozer and 836H Landfill Compactor Fuel System Primary Filter (Water Separator) - Check/Drain
2008/11/17 A New Outer Valve Spring Is Now Used {1100, 1108}
2008/12/08 A New Outer Valve Spring is Now Used {1100, 1108}
2008/11/10 The Axles for the Undercarriage Have Been Improved {3282}
2008/12/01 A New Vented Access Door for the Engine Compartment Is Available {7263, 7273}
Installation Procedure for the Space Heater On Generator Sets{4450} Installation Procedure for the Space Heater On Generator Sets{4450}
2009/01/26 An Updated Torque Setting Is Used For Battery Terminals {1402, 1408}
Unreliable Faults Are Found With Body Position Sensors On Off Highway Trucks{1408, 1439} Unreliable Faults Are Found With Body Position Sensors On Off Highway Trucks{1408, 1439}
834H Wheel Dozer and 836H Landfill Compactor Mirror - If Equipped
R1600G Load Haul Dump 3176C Engine Supplement Fan Drive
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems Hydraulic Oil Filter (Rotor Transmission)
120K and 120K Series 2 Motor Graders Power Train Transmission Case
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.