Pilot Lines - Control Valve and Pump
Show/hide table
Illustration 1 | g01623252 |
Top view |
Note: Sharp corners at the cutting edge of each cable strap shall not be allowed.
Show/hide table
Illustration 2 | g01623593 |
(1) Apply 5H-2471 Adhesive to the surface of the grommet.
(2) Torque for four hose assemblies ... 76 ± 4 N·m (55 ± 3 lb ft)
Show/hide table
Illustration 3 | g01623608 |
Rear right view |
(3) Torque for the connector assembly ... 29 ± 3 N·m (21 ± 2 lb ft)
Show/hide table
Illustration 4 | g01623609 |
Left front view |
(4) Torque for two tee assemblies ... 29 ± 3 N·m (21 ± 2 lb ft)
(5) Torque for the elbow assembly ... 40 ± 5 N·m (30 ± 4 lb ft)
(6) Torque for the connector assembly ... 40 ± 5 N·m (30 ± 4 lb ft)
(7) Torque for two plug assemblies ... 29 ± 3 N·m (21 ± 2 lb ft)
(8) Torque for four elbow assemblies ... 29 ± 3 N·m (21 ± 2 lb ft)
Caterpillar Information System:
314D CR Hydraulic Excavator C4.2 Engine Supplement Engine Oil Filter and Oil Filter Base - Remove and Install
325D and 329D Excavators and 325D Material Handler Machine System Specifications Hydraulic Generator - Hydraulic Lines
319D Excavator Machine System Specifications Boom Cylinder
319D Excavator Machine System Specifications Auxiliary Hydraulic Lines - Coupler Lines
2008/08/25 An Improved Hydraulic Electronic Unit Injector (HEUI) Pump is Available {1714}
Dimensions for Articulated Joints and Steering Cylinder Bores for Motor Graders {7050, 7051, 7065, 7066} Dimensions for Articulated Joints and Steering Cylinder Bores for Motor Graders {7050, 7051, 7065, 7066}
GLC85 Forestry Grapple Shipping
GLC85 Forestry Grapple Transport Position
3408E and 3412E Engines for Caterpillar Built Machines Electrical Connectors - Inspect
2008/08/11 Procedure is Available for Cold Planers and Wheel Saws of Skid Steer Loaders and Multi Terrain Loaders to Improve Fit of the Mounting Frame. {6634, 6712}
Procedures for the Repair of Cracks in Reach Booms{6000, 6501} Procedures for the Repair of Cracks in Reach Booms{6000, 6501}
Installation Procedure for 260-8015 Front Lines Gp (Medium pressure){5057, 5117, 6307} Installation Procedure for 260-8015 Front Lines Gp (Medium pressure){5057, 5117, 6307}
345D, 349D and 349D2 Excavators Camera
314D CR Hydraulic Excavator C4.2 Engine Supplement Fuel Filter and Water Separator Base - Remove and Install
330D and 336D Excavators Specifications
Reuse and Salvage for Mechanical Governor Groups in 3114, 3116, and 3126 Engines Equipped with Mechanical Unit Injectors (MUI) {0374, 1000, 1050, 1250, 1300} Reuse and Salvage for Mechanical Governor Groups in 3114, 3116, and 3126 Engines Equipped with Mechanical Unit Injectors (MUI) {0374, 1000, 1050, 1250, 1300}
314D CR Hydraulic Excavator Machine Systems Main Control Valve - Remove
307D Excavator Sound Information and Vibration Information
303.5E2, 304E2, 305.5E2 and 305E2 Mini Hydraulic Excavators Mirror - If Equipped
390D Excavator Camera - Clean/Adjust
Installation Procedure for 260-7983 Pump Lines Gp (Hydraulic oil cooler, Pilot System) on Certain Hydraulic Excavators{5057, 6307} Installation Procedure for 260-7983 Pump Lines Gp (Hydraulic oil cooler, Pilot System) on Certain Hydraulic Excavators{5057, 6307}
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications Travel Motor Lines
319D Excavator Machine System Specifications Pilot Lines - Main Control Valve
345C Excavator (Ultra High Demolition) Hydraulic System Return Hydraulic System