Procedure is Available for Cold Planers and Wheel Saws of Skid Steer Loaders and Multi Terrain Loaders to Improve Fit of the Mounting Frame. {6634, 6712}
- Work Tool:
- PC203 (S/N: PCB188-194)
- PC204 (S/N: RDG356-368)
- PC205 (S/N: RBG450-467)
- PC206 (S/N: DDG598-607)
- PC210 (S/N: GDR343-364)
- SW45 (S/N: WWS299)
- SW60 (S/N: WLS249-250)
There are some 219-5390 Frame As that may have been fabricated with the incorrect dimensions. The dimensions affect the engagement of the coupler for the Skid Steer Loaders and Multi Terrain Loaders with the Work Tool. This will cause the coupler to fit loosely and this will allow some vertical movement between the coupler and the Work Tool.
The procedure for checking the production dimensions of the mounting frame and the rework procedure for correcting the issue are available in Special Instruction, REHS4585, "Cold Planer And Wheel Saw Frame Rework".
Caterpillar Information System:
Procedures for the Repair of Cracks in Reach Booms{6000, 6501} Procedures for the Repair of Cracks in Reach Booms{6000, 6501}
Installation Procedure for 260-8015 Front Lines Gp (Medium pressure){5057, 5117, 6307} Installation Procedure for 260-8015 Front Lines Gp (Medium pressure){5057, 5117, 6307}
320D Excavator Camera
325D and 329D Excavators and 325D Material Handler Machine System Specifications Stick Cylinder Lines - Long Reach
325D and 329D Excavators and 325D Material Handler Machine System Specifications Pilot Valve (Travel)
319D Excavator Machine System Specifications Bucket Cylinder Lines
319D Excavator Machine System Specifications Bucket Cylinder Lines
325D and 329D Excavators and 325D Material Handler Machine System Specifications Stick Cylinder
325D and 329D Excavators and 325D Material Handler Machine System Specifications Front Lines - Boom Cylinder
390D Excavator Restricted Visibility
Procedure for Repairing Cracks at the Mounting Locations for the Grab Handles on Machines with Cabs{7301} Procedure for Repairing Cracks at the Mounting Locations for the Grab Handles on Machines with Cabs{7301}
325D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Operator Controls
3408E and 3412E Engines for Caterpillar Built Machines Electrical Connectors - Inspect
GLC85 Forestry Grapple Transport Position
GLC85 Forestry Grapple Shipping
Dimensions for Articulated Joints and Steering Cylinder Bores for Motor Graders {7050, 7051, 7065, 7066} Dimensions for Articulated Joints and Steering Cylinder Bores for Motor Graders {7050, 7051, 7065, 7066}
2008/08/25 An Improved Hydraulic Electronic Unit Injector (HEUI) Pump is Available {1714}
319D Excavator Machine System Specifications Auxiliary Hydraulic Lines - Coupler Lines
319D Excavator Machine System Specifications Boom Cylinder
325D and 329D Excavators and 325D Material Handler Machine System Specifications Hydraulic Generator - Hydraulic Lines
314D CR Hydraulic Excavator C4.2 Engine Supplement Engine Oil Filter and Oil Filter Base - Remove and Install
325D and 329D Excavators Machine System Specifications Pilot Lines - Control Valve and Pump
345D, 349D and 349D2 Excavators Camera
314D CR Hydraulic Excavator C4.2 Engine Supplement Fuel Filter and Water Separator Base - Remove and Install