Bucket Cylinder Lines
Show/hide table
 | |
| Illustration 1 | g01622713 |
(A) Distance from the centerline of the mounting pin to the centerline of the support assemblies ... 315 mm (12.4 inch)
(1) Torque for four bolts ... 51.20 ± 9.61 N·m (38 ± 7 lb ft)
(C) Orientation of the support assemblies ... 45 degrees
(2) Torque for two bolts ... 31.50 ± 5.88 N·m (23 ± 4 lb ft)
(3) Torque for the bolt ... 56.9 ± 10.7 N·m (42 ± 8 lb ft)
Caterpillar Information System:
319D Excavator Machine System Specifications Bucket Cylinder Lines
325D and 329D Excavators and 325D Material Handler Machine System Specifications Stick Cylinder
325D and 329D Excavators and 325D Material Handler Machine System Specifications Front Lines - Boom Cylinder
390D Excavator Restricted Visibility
Procedure for Repairing Cracks at the Mounting Locations for the Grab Handles on Machines with Cabs{7301} Procedure for Repairing Cracks at the Mounting Locations for the Grab Handles on Machines with Cabs{7301}
325D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Operator Controls
323D MHPU Mobile Hydraulic Power Unit Maintenance Interval Schedule
314D CR Hydraulic Excavator C4.2 Engine Supplement Coolant Tank (Expansion) - Remove and Install
345C Excavator (Ultra High Demolition) Hydraulic System Control Valve (Straight Travel)
325D and 329D Excavators and 325D Material Handler Machine System Specifications Stick - 7.85 m (25.755 ft)
2008/08/18 An Improved Stick Regeneration Valve is Now Available for Certain Excavators {5051}
319D Excavator Machine System Specifications Boom - 5.3 m (17.39 ft)
325D and 329D Excavators and 325D Material Handler Machine System Specifications Pilot Valve (Travel)
325D and 329D Excavators and 325D Material Handler Machine System Specifications Stick Cylinder Lines - Long Reach
320D Excavator Camera
Installation Procedure for 260-8015 Front Lines Gp (Medium pressure){5057, 5117, 6307} Installation Procedure for 260-8015 Front Lines Gp (Medium pressure){5057, 5117, 6307}
Procedures for the Repair of Cracks in Reach Booms{6000, 6501} Procedures for the Repair of Cracks in Reach Booms{6000, 6501}
2008/08/11 Procedure is Available for Cold Planers and Wheel Saws of Skid Steer Loaders and Multi Terrain Loaders to Improve Fit of the Mounting Frame. {6634, 6712}
3408E and 3412E Engines for Caterpillar Built Machines Electrical Connectors - Inspect
GLC85 Forestry Grapple Transport Position
GLC85 Forestry Grapple Shipping
Dimensions for Articulated Joints and Steering Cylinder Bores for Motor Graders {7050, 7051, 7065, 7066} Dimensions for Articulated Joints and Steering Cylinder Bores for Motor Graders {7050, 7051, 7065, 7066}
2008/08/25 An Improved Hydraulic Electronic Unit Injector (HEUI) Pump is Available {1714}
319D Excavator Machine System Specifications Auxiliary Hydraulic Lines - Coupler Lines