Improved Troubleshooting Guide for the 385-01 Fault Code {1130}
- Engine:
- C11 (S/N: KCA1-UP)
- C13 (S/N: KCB1-UP; LEE1-UP)
- C15 (S/N: SDP1-UP; MXS1-UP; NXS1-UP)
Description of Change: There has been an improvement to the existing troubleshooting guides for the engines that are listed above. The new troubleshooting guides include charts for the requirement of the oil pressure of the variable valve actuators. This information was not available in the previous troubleshooting guide.
Also for the C15 engine, the step for testing the sensor for the variable valve actuator has been moved to an earlier step in the troubleshooting process.
Adaptable To: The new troubleshooting guides are used on the groups of engine serial numbers that are listed above.
Caterpillar Information System:
Diesel Fuel Cleanliness Analysis By Automatic Particle Counting {0680, 1250, 1280} Diesel Fuel Cleanliness Analysis By Automatic Particle Counting {0680, 1250, 1280}
C4.4 and C6.6 Engines Engine Misfires, Runs Rough or Is Unstable
C4.4 Generator Set Engines Engine Cranks but Will Not Start
C4.4 Generator Set Engines ECM Will Not Accept Factory Passwords
G3412C, G3508, G3512 and G3516 Engines Status Control Module Engine Shutdown Unexpected and All Fault Indicators Are Flashing
C4.4 Generator Set Engines Customer Specified Parameters Worksheet
C6.6 Marine Generator Set Cylinder Head
C4.4 Generator Set Engines Customer Specified Parameters Table
C18 Generator set and C18 Marine Engines Engine Support (Front) - Remove and Install
C4.4 Generator Set Engines Customer Specified Parameters
C4.4 Generator Set Engines Speed Demand Input Setup
C6.6 Marine Generator Set Cooling System Coolant (DEAC) - Change
C9 Petroleum Engines Aftercooler Core - Clean/Test - Sea Water Cooled
G3412C, G3508, G3512 and G3516 Engines Status Control Module Fault Indicator Does Not Reset
G3412C, G3508, G3512 and G3516 Engines Status Control Module Engine Overcrank Occurrence
G3412C, G3508, G3512 and G3516 Engines Status Control Module Engine Overspeed Occurrence
C4.4 Generator Set Engines Excessive Fuel Consumption
C4.4 Generator Set Engines Excessive White Smoke
C4.4 Generator Set Engines Intake Air Temperature Is Too High
C6.6 Marine Generator Set Cooling System Coolant (ELC) - Change
C4.4 Generator Set Engines Diagnostic Code Cross Reference
C6.6 Marine Generator Set Cooling System Coolant Level - Check
3500C Marine Engines Air Inlet and Exhaust Lines
G3412C, G3508, G3512 and G3516 Engines Status Control Module Low Oil Pressure Shutdown Occurrence