Customer Specified Parameters Table
Show/hide table
Customer Specified Parameters | ||
---|---|---|
ECM Parameter | Possible Values | Default Value |
Engine Rating Parameter | ||
"Rating Number" | 1 to 4 | 1 |
ECM Identification Parameter | ||
"Equipment ID" | 17 Digits
Available characters are dependent on the service tool that is used |
Not Programmed |
Miscellaneous | ||
"Monitoring Mode Shutdowns" | Disabled
Enabled |
Disabled |
J1939 Continuous Fault Handling | ||
"Remote Torque Speed Control Enable Status" | Disabled
Enabled |
Disabled |
Configurable Inputs | ||
"Overspeed Protection" | 1500 to 2100 rpm | 2100 rpm |
"Configurable Governor Droop" | 0% to 8% | 0% |
"Coolant Level Sensor" | Not Installed
Installed J1:38 |
Not Installed |
"Air Filter Restriction Switch Installation Status" | Not Installed
Installed J1:47 |
Not Installed |
"Fuel/Water Separator Switch Installation Status" | Not Installed
Installed J1:44 |
Not Installed |
Caterpillar Information System:
C18 Generator set and C18 Marine Engines Engine Support (Front) - Remove and Install
C4.4 Generator Set Engines Customer Specified Parameters
C4.4 Generator Set Engines Speed Demand Input Setup
C6.6 Marine Generator Set Cooling System Coolant (DEAC) - Change
C4.4 Generator Set Engines Engine Wiring Information
C6.6 Marine Generator Set Cylinder Head Valves
C4.4 Generator Set Engines Replacing the ECM
C4.4 and C6.6 Engines Electronic Service Tools
C4.4 Generator Set Engines Glossary
C6.6 Marine Generator Set Valve Mechanism Cover
C4.4 Generator Set Engines System Overview
3500C Marine Engines Exhaust Manifold
C6.6 Marine Generator Set Cylinder Head
C4.4 Generator Set Engines Customer Specified Parameters Worksheet
G3412C, G3508, G3512 and G3516 Engines Status Control Module Engine Shutdown Unexpected and All Fault Indicators Are Flashing
C4.4 Generator Set Engines ECM Will Not Accept Factory Passwords
C4.4 Generator Set Engines Engine Cranks but Will Not Start
C4.4 and C6.6 Engines Engine Misfires, Runs Rough or Is Unstable
Diesel Fuel Cleanliness Analysis By Automatic Particle Counting {0680, 1250, 1280} Diesel Fuel Cleanliness Analysis By Automatic Particle Counting {0680, 1250, 1280}
2008/08/01 Improved Troubleshooting Guide for the 385-01 Fault Code {1130}
C9 Petroleum Engines Aftercooler Core - Clean/Test - Sea Water Cooled
G3412C, G3508, G3512 and G3516 Engines Status Control Module Fault Indicator Does Not Reset
G3412C, G3508, G3512 and G3516 Engines Status Control Module Engine Overcrank Occurrence
G3412C, G3508, G3512 and G3516 Engines Status Control Module Engine Overspeed Occurrence