Engine Support (Front) - Remove and Install
Start By:
- Remove the vibration damper and the pulley. Refer to Disassembly and Assembly, "Vibration Damper and Pulley - Remove and Install".
- Support the front of the engine with a suitable lifting device. The weight of the engine is approximately
1700 kg (3750 lb) . - Remove bolts (1) from engine support (2).
- Use two people in order to remove engine support (2) from the front housing. The weight of engine support (2) is approximately
30 kg (66 lb) .
Show/hide table
Illustration 1 | g01618515 |
- Use two people in order to position engine support (2) on the front housing. The weight of engine support (2) is approximately
30 kg (66 lb) . - Install bolts (1) in engine support (2).
Show/hide table
Illustration 2 | g01618515 |
End By:
- Install the vibration damper and the pulley. Refer to Disassembly and Assembly, "Vibration Damper and Pulley - Remove and Install".
Caterpillar Information System:
C4.4 Generator Set Engines Customer Specified Parameters
C4.4 Generator Set Engines Speed Demand Input Setup
C6.6 Marine Generator Set Cooling System Coolant (DEAC) - Change
C4.4 Generator Set Engines Engine Wiring Information
C6.6 Marine Generator Set Cylinder Head Valves
C4.4 Generator Set Engines Replacing the ECM
C4.4 and C6.6 Engines Electronic Service Tools
C4.4 Generator Set Engines Glossary
C6.6 Marine Generator Set Valve Mechanism Cover
C4.4 Generator Set Engines System Overview
3500C Marine Engines Exhaust Manifold
3500C Marine Engines Exhaust Manifold
C4.4 Generator Set Engines Customer Specified Parameters Table
C6.6 Marine Generator Set Cylinder Head
C4.4 Generator Set Engines Customer Specified Parameters Worksheet
G3412C, G3508, G3512 and G3516 Engines Status Control Module Engine Shutdown Unexpected and All Fault Indicators Are Flashing
C4.4 Generator Set Engines ECM Will Not Accept Factory Passwords
C4.4 Generator Set Engines Engine Cranks but Will Not Start
C4.4 and C6.6 Engines Engine Misfires, Runs Rough or Is Unstable
Diesel Fuel Cleanliness Analysis By Automatic Particle Counting {0680, 1250, 1280} Diesel Fuel Cleanliness Analysis By Automatic Particle Counting {0680, 1250, 1280}
2008/08/01 Improved Troubleshooting Guide for the 385-01 Fault Code {1130}
C9 Petroleum Engines Aftercooler Core - Clean/Test - Sea Water Cooled
G3412C, G3508, G3512 and G3516 Engines Status Control Module Fault Indicator Does Not Reset
G3412C, G3508, G3512 and G3516 Engines Status Control Module Engine Overcrank Occurrence