C15 On-highway Engine Caterpillar


BrakeSaver

Usage:

C15 BXS


Illustration 1g01624700
Front view

Note: Base the wear sleeve against the carrier . Flush the seal with the wear sleeve. The seal and the wear sleeve should be installed simultaneously. The seal group cannot be used once the seal has been separated from the wear sleeve.



Illustration 2g01624657
(3) Stator
(4) Seal group
(5) Brakesaver seal group

(1) The seal carriers are heated to 149 °C (300 °F) in order to install the seal carriers onto the rotor assembly (6). Do not use a torch.

(2) Heat the gear to 315 °C (600 °F) for the installation on the gear plate assembly. Do not use a torch.

(7) Torque for 22 bolts ... 55 ± 7 N·m (41 ± 5 lb ft)

Caterpillar Information System:

C15 and C18 Petrolem Generator Set Engines Switch Circuits - Test
Transmission Clutch Plates and Disc Assemblies with F37 and F37X Friction Material {3030, 3155, 3190} Transmission Clutch Plates and Disc Assemblies with F37 and F37X Friction Material {3030, 3155, 3190}
Air Conditioning and Heating R134a for All Caterpillar Machines Refrigerant Orifice Tube Assembly
345D, 349D and 349D2 Excavator Machine System Specifications Boom Cylinder Lines
C11 and C13 Engines Front Housing and Covers
C6.6 Marine Generator Set Turbocharger - Inspect
C15 On-highway Engine BrakeSaver Control Valve
C6.6 Marine Generator Set ECM Will Not Accept Factory Passwords
C6.6 Marine Generator Set EMCP3 Component Location
C6.6 Marine Generator Set Speed Demand Input Setup
345D, 349D and 349D2 Excavator Machine System Specifications Return Lines - Boom Float
345D, 349D and 349D2 Excavator Machine System Specifications Pilot Lines
3054C Engines for Caterpillar Built Machines Fuel Injection Pump Timing - Adjust
C6.6 Marine Generator Set Engine Vibration
3500B Engines for Caterpillar Built Power Modules Turbocharger Oil Lines
3500 Engines Turbocharger Oil Lines
C6.6 Marine Generator Set Sensors and Electrical Components
C9 On-highway Engine Fuel Injection Lines
C15 and C18 Petrolem Generator Set Engines Direct Fuel Control Mode - Test
3608 Engine Water Temperature Regulator - Replace
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine System Solenoid Valve (Proportional Reducing)
C6.6 Marine Generator Set CID 0041 FMI 03
C6.6 Marine Generator Set CID 0041 FMI 04
795F AC and 795F AC XQ Off-Highway Trucks Front Wheel Oil Level - Check
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.