A New Bearing Block within the Governor is Now Used {1000}
- Marine Engine:
- 3126 (S/N: 4EZ1-UP)
Description of Change: A new bearing block within the governor is now used on 3126 Engines. The new bearing block uses needle bearings. The old bearing block used a sleeve bearing.
Adaptable To: The 107-7498 Bearing Block Assembly has been cancelled and replaced by the 7E-3216 Bearing Block Assembly. This change is effective in the 151-8660 Governor Gp beginning with serial number 15280738 on the governor. This change is also adaptable to prior governors.
Caterpillar Information System:
C7 PETROLEUM Petroleum Engine Crankshaft Rear Seal - Install
C7 PETROLEUM Petroleum Engine Water Temperature Regulator - Remove and Install
C175-16 and C175-20 Generator Set Engines Cylinder Head Valves
345D, 349D and 349D2 Excavator Machine System Specifications Hydraulic Oil Cooler Lines Group
345D, 349D and 349D2 Excavator Machine System Specifications Swing Motor Lines
C13, C15, and C18 Tier 4 Final Engines Speed/Timing Sensor
C7 PETROLEUM Petroleum Engine Engine Oil Pump - Assemble
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155} Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
C175-16 and C175-20 Generator Set Engines Inlet Air Temperature Is High
C175-16 and C175-20 Generator Set Engines Exhaust Temperature Is Low
345D, 349D and 349D2 Excavators Hydraulic System Boom Drift Reduction Valve
2008/05/01 Improvements have been made to Remanufactured Fuel Injectors {1251, 1254, 1290, 1713}
C4.4 and C6.6 Engines for Caterpillar Built Machines Electrical Connectors - Inspect
C175-16 and C175-20 Generator Set Engines Engine Oil Pan
C175-16 and C175-20 Generator Set Engines Engine Oil Pan
C7 PETROLEUM Petroleum Engine Housing (Front) - Remove
C7 PETROLEUM Petroleum Engine Housing (Front) - Install
2008/04/14 Increased Support for Repair Parts is Available for Products that are sold by Dealer Service Tools from Advanced Technology Services {0599}
2008/03/17 Updated Instruction For The Bypass Harness {0785, 1408}
Transmission Clutch Plates and Disc Assemblies with Rayflex Friction Material {3030, 3155, 3190} Transmission Clutch Plates and Disc Assemblies with Rayflex Friction Material {3030, 3155, 3190}
C7 PETROLEUM Petroleum Engine Valve Mechanism Cover - Remove and Install
Information on the Clean Gas Induction (CGI) Flex Pipe Connection Found Broken in Some 2007 Emissions Compliant Engines{1071, 108N, 5510} Information on the Clean Gas Induction (CGI) Flex Pipe Connection Found Broken in Some 2007 Emissions Compliant Engines{1071, 108N, 5510}
345D, 349D and 349D2 Excavator Machine System Specifications Main Hydraulic Pump Mounting
3516C Locomotive Engine Configuration Parameters