A New Procedure for Installing the Internal Wiring Harness is Now Used {1120, 1408}
- On-Highway Engine:
- C15 (S/N: MXS1-UP; NXS1-UP)
Description of Change: A new procedure is now used when you install the internal wiring harness for the fuel injectors. The new procedure reduces the chance of damage to the wiring harness. Damage to the internal wiring harness can cause many issues that will cause the engine not to operate properly.
Adaptable To: Refer to Disassembly and Assembly, RENR9403, "C15 On-highway Engines ", "Valve Mechanism Cover Base - Remove and Install" for the proper procedure for installing the internal wiring harness for the fuel injectors.
Caterpillar Information System:
C175-16 and C175-20 Generator Set Engines Gear Group (Front)
3500 Engines with EUI Option Flywheel Housing
C15 Petroleum Generator Set Engines Speed/Timing Sensor
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine System Check Valve
345D, 349D and 349D2 Excavator Machine System Specifications Pump Lines (Main)
345D, 349D and 349D2 Excavators Hydraulic System Electronic Control System
C13T-TH35 and C15T-TH35 Petroleum Packages Plate Locations and Film Locations
C175-16 and C175-20 Generator Set Engines Fuel Control - Test
3500B Engines and 776D, 777D, 784C, 785C, 789C, 793C and 793D Off-Highway Truck/Tractors Engine Oil Scavenge Pump
3512B SR4B Generator Sets Emergency Stopping
Frequently Asked Questions about Oil Emulsion{1000, 1317, 1348} Frequently Asked Questions about Oil Emulsion{1000, 1317, 1348}
345D, 349D and 349D2 Excavators Hydraulic System Fan Pump (Hydraulic and Radiator Cooling)
C175-16 and C175-20 Generator Set Engines Coolant Temperature Is High
C175-16 and C175-20 Generator Set Engines Coolant Temperature Is Low
C175-16 and C175-20 Generator Set Engines Exhaust Temperature Is High
2008/05/19 Improvements have been made to Remanufactured Fuel Injectors {1251, 1254, 1290, 1713}
2008/04/07 Improvements have been made to Remanufactured Fuel Injectors {1251, 1254, 1290, 1713}
2008/05/01 Improvements have been made to Remanufactured Fuel Injectors {1251, 1254, 1290, 1713}
345D, 349D and 349D2 Excavators Hydraulic System Boom Drift Reduction Valve
C175-16 and C175-20 Generator Set Engines Exhaust Temperature Is Low
C175-16 and C175-20 Generator Set Engines Inlet Air Temperature Is High
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155} Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
C7 PETROLEUM Petroleum Engine Engine Oil Pump - Assemble
C13, C15, and C18 Tier 4 Final Engines Speed/Timing Sensor