- Load Haul Dump:
- R1700G (S/N: SBR588,591-UP)
The following information is an addition to the safety section of the Operation and Maintenance Manual. The new information is effective with SBR588 and SBR591-UP.
There are several specific messages on this machine. The exact location of the messages and the description of the messages are reviewed in this section. Please become familiarized with all messages.
Make sure that all of the messages are legible. Clean the messages or replace the messages if you cannot read the words. Replace the illustrations if the illustrations are not legible. When you clean the messages, use a cloth, water and soap. Do not use solvent, gasoline, or other harsh chemicals to clean the messages. Solvents, gasoline, or harsh chemicals could loosen the adhesive that secures the messages. Loose adhesive will allow the messages to fall.
Replace any message that is damaged, or missing. If a message is attached to a part that is replaced, install a message on the replacement part. Any Caterpillar dealer can provide new messages.
 | |
| Illustration 1 | g01440998 |
 | |
| Illustration 2 | g01440993 |
 | |
| Illustration 3 | g01431880 |
Do Not Weld or Drill on Lift Arm (1) . This message is located on the left side and the right side of the lift arm.
 | |
| Illustration 4 | g01429877 |
Transmission Oil Fast Fill (2) . This message is located in the articulation area on the right side of the machine.
 | |
| Illustration 5 | g01429856 |
This additional message identifies the location of the fast fill connector for the transmission oil.
Hydraulic Oil Fast Fill (3) . This message is located in the articulation area on the right side of the machine.
 | |
| Illustration 6 | g01429855 |
This additional message identifies the location of the fast fill connector for the hydraulic oil.
Alternate Exit (4) . This message is located on the rear window and the inner window.
 | |
| Illustration 7 | g01002993 |
Note: The rear window and the inner window are the alternate exits. Other windows in the operator station may be fitted with this additional message.
If the primary exit is blocked, exert outward pressure on the window until the window separates from the operator station frame. Exit the machine through the window.
Alternate Exit (5) . This message is located on the rear window and the inner window.
 | |
| Illustration 8 | g01429881 |
Note: The rear window and the inner window are the alternate exits. Other windows in the operator station may be fitted with this additional message.
If the primary exit is blocked, exert outward pressure on the window until the window separates from the operator station frame. Exit the machine through the window.
Engine Oil Fast Fill (6) . This message is located on the right side of the machine.
 | |
| Illustration 9 | g01429882 |
This additional message identifies the location of the fast fill connector for the engine oil.
Engine Coolant Fast Fill (7) . This message is located at the rear of the radiator on the right side of the machine.
 | |
| Illustration 10 | g01429853 |
This additional message identifies the location of the fast fill connector for the engine coolant.
Extended Life Coolant (ELC) (8) This additional message is located next to the cooling system pressure cap.
 | |
| Illustration 11 | g01425705 |
The cooling system is filled with Extended Life Coolant (ELC) from the factory.
Fire Suppression System (Foam) (If Equipped) (9) (10) (13) . This additional message is located on the foam fire suppression system manual control.
 | |
| Illustration 12 | g01431884 |
This additional message is located on the right side of the radiator guard and in the operator station.
 | |
| Illustration 13 | g01431893 |
For more information on the foam fire suppression system, refer to Operation and Maintenance Manual, "Fire Suppression System (Foam)".
Fire Suppression System (Dry Powder) (If Equipped) (11) (12) . This additional message is located on the right side of the radiator guard and in the operator station.
 | |
| Illustration 14 | g01431885 |
For more information on the dry powder fire suppression system, refer to Operation and Maintenance Manual, "Fire Suppression System (Dry Powder)".