2007/09/17 Caterpillar


Fuel Injection Pump {1251, 5479}

Usage:

3024C 424
Engine:
C2.2 (S/N: TAG1-UP; G7M1-UP)
Industrial Engine:
3024C (S/N: G4P1-UP; 4241-UP)

An improved procedure has been introduced for removing the fuel injection pump on 3024C engines. Failure to follow the procedure may result in damage to the fuel rack control. The procedure is described below.

  1. Apply a positive force to the fuel rack control through the opening of the fuel shutoff solenoid.

  1. This will force the fuel rack control past this opening.

  1. Remove the fuel injection pump.

To install the fuel injection pump, refer to Disassembly and Assembly, "Fuel Injection Pump - Install" for the correct procedure.

Caterpillar Information System:

C3.3 Industrial Engine Engine Design
C11 and C13 Petroleum Engines Warranty Information
Reusability of Drive Train Gears {3002, 3159, 3256, 4055} Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752} A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}
C9 Petroleum Engines Engine Oil and Filter - Change
C11 and C13 Engines and 14M and 16M Motor Graders Sensor Signal (Analog, Passive) - Test
12M Motor Grader Before Operation
C13, C15, and C18 Tier 4 Final Engines Exhaust Manifold
2007/07/16 High Copper Reported in Routine Engine Oil Samples {1308, 1318, 1348}
Troubleshooting Fuel Injector Failures on Some C13 and C15 On-highway Engines{1290, 1408} Troubleshooting Fuel Injector Failures on Some C13 and C15 On-highway Engines{1290, 1408}
C32 Power Module Fuel System Primary Filter/Water Separator - Drain
CX31 On-Highway Transmission Reference Material
C3.3 Industrial Engine General Information
C3.3 Industrial Engine Fuel System
C3.3 Industrial Engine Air Inlet and Exhaust System
C3.3 Industrial Engine Lubrication System
C3.3 Industrial Engine Cooling System
3054C Industrial Engine Alternator and Fan Belts - Inspect/Adjust/Replace
C3.3 Industrial Engine Electrical System
C3.3 Industrial Engine Basic Engine
C3.3 Industrial Engine Fuel System - Inspect
C3.3 Industrial Engine Air in Fuel - Test
C3.3 Industrial Engine Finding Top Center Position for No. 1 Piston
C3.3 Industrial Engine Fuel Injection Nozzle - Test
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.