C3.3 Industrial Engine Caterpillar

Engine Design

Usage:

C3.3 E3K

Show/hide table




Illustration 1	g01223241
(A) Exhaust valve (B) Inlet valve

C3.3 Industrial Engine Specification

Type ... Three cylinder and four stroke

Type of combustion ... Direct injection

Bore ... 105 mm (4.133 inch)

Stroke ... 127 mm (5.00 inch)

Displacement ... 3.3 L (201 in³)

Compression ratio

Naturally aspirated ... 19.25:1

Turbocharged ... 18.23:1

Turbocharged aftercooled ... 18.2:1

Number of cylinders ... 3

Cylinder arrangement ... In-line

Firing order ... 1, 2, 3

When the crankshaft is viewed from the front of the engine, the crankshaft rotates in the following direction. ... Clockwise

The front of the engine is opposite the flywheel end of the engine. The left side of the engine and the right side of the engine are determined from the flywheel end. Number 1 cylinder is the front cylinder of the engine.

Caterpillar Information System:

C11 and C13 Petroleum Engines Warranty Information

Reusability of Drive Train Gears {3002, 3159, 3256, 4055} Reusability of Drive Train Gears {3002, 3159, 3256, 4055}

A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752} A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}

C9 Petroleum Engines Engine Oil and Filter - Change

C11 and C13 Engines and 14M and 16M Motor Graders Sensor Signal (Analog, Passive) - Test

12M Motor Grader Before Operation

C13, C15, and C18 Tier 4 Final Engines Exhaust Manifold

2007/07/16 High Copper Reported in Routine Engine Oil Samples {1308, 1318, 1348}

Troubleshooting Fuel Injector Failures on Some C13 and C15 On-highway Engines{1290, 1408} Troubleshooting Fuel Injector Failures on Some C13 and C15 On-highway Engines{1290, 1408}

C32 Power Module Fuel System Primary Filter/Water Separator - Drain

CX31 On-Highway Transmission Reference Material

CX31 On-Highway Transmission Oil Filter (Transmission) - Replace

2007/09/17 Fuel Injection Pump {1251, 5479}

C3.3 Industrial Engine General Information

C3.3 Industrial Engine Fuel System

C3.3 Industrial Engine Air Inlet and Exhaust System

C3.3 Industrial Engine Lubrication System

C3.3 Industrial Engine Cooling System

3054C Industrial Engine Alternator and Fan Belts - Inspect/Adjust/Replace

C3.3 Industrial Engine Electrical System

C3.3 Industrial Engine Basic Engine

C3.3 Industrial Engine Fuel System - Inspect

C3.3 Industrial Engine Air in Fuel - Test

C3.3 Industrial Engine Finding Top Center Position for No. 1 Piston