General Information
This document describes the following procedures:
- Installing the DrillWizard
- Configuring the DrillWizard
DrillWizard is a piece of office software. DrillWizard uses a TCP/IP connection in order to allow the user to perform the following tasks:
- Uploading of maps to an Aquila based drill system
- Downloading of production and/or diagnostic files from an Aquila based drill system
Caterpillar Information System:
C175-16 Locomotive Engine Engine Speed Sensor
2006/06/26 A New Speed-Timing Sensor is Available {1912}
2006/07/03 An Improved Link is Now available {5102, 6119}
C4.4 Industrial Engine Compression - Test
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Sideshift Slide Lock Circuit - If Equipped
Filtration Procedure for Off-Highway Truck (769-793) Transmission Oil {0680, 0768, 3030, 3177} Filtration Procedure for Off-Highway Truck (769-793) Transmission Oil {0680, 0768, 3030, 3177}
773E, 773F, 775F, 777E, and 777F Off-Highway Truck Chassis Electronic Control System Transmission Clutch - Calibrate
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System System Schematic
Field Installation of the 266-2411 Backhoe Auxiliary Lines Gp (Kit) for 430E Backhoes with a Standard Stick{5057} Field Installation of the 266-2411 Backhoe Auxiliary Lines Gp (Kit) for 430E Backhoes with a Standard Stick{5057}
2006/08/21 New Seal Available for Lower Window {7301, 7310}
700 Family Articulated Trucks - Changes to the Test Lines{5057} 700 Family Articulated Trucks - Changes to the Test Lines{5057}
2006/06/26 New Assembly of the Drive Plate to the Torque Converter Improves Reliability {3279}
3176C Engines for Caterpillar Built Machines System Overview
AQUILATM DrillWizard Installation
572R Series II Pipelayer Priority Valve - Test and Adjust
AQUILATM DrillWizard Configuration
C6.6 Engines for Caterpillar Built Machines Fuel Priming Pump
279C, 279C2, 289C, 289C2 and 299C Compact Track Loaders, 287C, 277C, 277C2, 287C2 and 297C Multi Terrain Loaders and 246C, 256C, 262C, 262C2 and 272C Skid Steer Loaders Machine Electronic Control System Calibration
2006/06/26 An Improved Hose Routing for the Heater and Air Conditioner is Now Available on Reclaimer Mixers {1808, 1812}
568 Forest Machine Machine System Specifications Front Idler
R1700G Load Haul Dump Fire Suppression System (Dry Powder) - If Equipped
2006/09/11 Adjustment Procedure for the Extendable Stick Wear Pads {6533}
2006/08/21 New Procedure for Installing Window Seals {7301, 7310}
C4.4 Industrial Engine Piston Height - Inspect