C175-16 Locomotive Engine Caterpillar


Engine Speed Sensor

Usage:

C175-16 3A9


图 1g02612197

表 1
244-5544 转速传感器的技术规格 
项目  数量  零件  技术规格 
注释:组装前,用待密封的润滑剂稍涂 O 形密封圈。 
6V-5215 螺栓  拧紧扭矩至 28 ± 7 N·m (250 ± 62 lb in)。 
转速传感器的输出信号为模拟信号。 
转速传感器和轮齿之间的最小间隙为 0.5 mm (0.02 in) 

Caterpillar Information System:

2006/07/03 A New Speed-Timing Sensor is Available {1912}
325D and 329D Excavators and 325D Material Handler Machine System Specifications Swivel
C4.4 Industrial Engine Compression - Test
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Transmission Speed Sensor (Drive Disconnect) (Transmission Output)
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Fuse (Flywheel Cabinet)
C6.6 Engines for Caterpillar Built Machines Crankcase Breather
TA22-4WD Agricultural Transmission Transmission
C4.4 Industrial Engine Cleanliness of Fuel System Components
3500B Industrial Engine Safety Messages
C175-16 and C175-20 Generator Set Engines Alternator and Regulator
C13, C15, and C18 Tier 4 Final Engines Connecting Rod
C13, C15, and C18 Tier 4 Final Engines Cylinder Block
390F Excavator Machine Systems Travel Motor - Disassemble
C32 Power Module Engine Valve Lash - Inspect/Adjust
C6.6 Engines for Caterpillar Built Machines Fuel Priming Pump
3606 and 3608 Engines Engine Lifting Bracket - Remove and Install
349F and 352F Excavators Machine System Specifications Control Valve (Boom Lowering) - Manual
568 Forest Machine Machine System Specifications Front Idler
2006/07/03 Change to the Design of the Wiring Harness {1408, 7422}
C4.4 Industrial Engine Piston Height - Inspect
2006/08/14 New Procedure for Measuring the Connecting Rod {1218, 1225}
Inspection and Testing of the Air Shutoff{1078} Inspection and Testing of the Air Shutoff{1078}
C9 On-highway Engine Engine to Transmission Adapter
C175-16 Engine for 795F Series AC Off-Highway Trucks Lifter Group
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.