2006/07/03 Caterpillar


An Improved Link is Now available {5102, 6119}

Usage:

268B LBA
Multi Terrain Loader:
287B (S/N: ZSA1-3527)
Skid Steer Loader:
252B (S/N: SCP1-3044)
262B (S/N: PDT1-3700)
268B (S/N: LBA1-1558)

Description of Change: A new 238-7685 Link is now available for the Multi Terrain Loader and Skid Steer Loaders that are listed above. The manufacturing process has been changed from a fabrication to a forging. The design of the link was changed, because the link was interfering with the lift cylinder. The overall thickness of the 238-7685 Link has been increased to 10.6 mm (0.417 inch). The new design will allow clearance between the link and the lift cylinder.

Adaptable To: The new 238-7685 Link replaces the previous 216-6195 Link. The new 238-7685 Link became effective in production with the following machines.

Multi Terrain Loader

  • 287B (S/N: ZSA3528-UP)

Skid Steer Loader

  • 252B (S/N: SCP3045-UP)

  • 262B (S/N: PDT3701-UP)

  • 268B (S/N: LBA1559-UP)

Caterpillar Information System:

C4.4 Industrial Engine Compression - Test
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Sideshift Slide Lock Circuit - If Equipped
Filtration Procedure for Off-Highway Truck (769-793) Transmission Oil {0680, 0768, 3030, 3177} Filtration Procedure for Off-Highway Truck (769-793) Transmission Oil {0680, 0768, 3030, 3177}
773E, 773F, 775F, 777E, and 777F Off-Highway Truck Chassis Electronic Control System Transmission Clutch - Calibrate
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System System Schematic
Field Installation of the 266-2411 Backhoe Auxiliary Lines Gp (Kit) for 430E Backhoes with a Standard Stick{5057} Field Installation of the 266-2411 Backhoe Auxiliary Lines Gp (Kit) for 430E Backhoes with a Standard Stick{5057}
2006/08/21 New Seal Available for Lower Window {7301, 7310}
700 Family Articulated Trucks - Changes to the Test Lines{5057} 700 Family Articulated Trucks - Changes to the Test Lines{5057}
2006/06/26 New Assembly of the Drive Plate to the Torque Converter Improves Reliability {3279}
R1700G Load Haul Dump Window Wiper and Washer Control
Steering Release Supplement for the R1600G Load Haul Dump{4284, 4300} Steering Release Supplement for the R1600G Load Haul Dump{4284, 4300}
Steering Release Supplement for the R1700G Load Haul Dump{4284, 4300} Steering Release Supplement for the R1700G Load Haul Dump{4284, 4300}
2006/06/26 A New Speed-Timing Sensor is Available {1912}
C175-16 Locomotive Engine Engine Speed Sensor
AQUILATM DrillWizard General Information
3176C Engines for Caterpillar Built Machines System Overview
AQUILATM DrillWizard Installation
572R Series II Pipelayer Priority Valve - Test and Adjust
AQUILATM DrillWizard Configuration
C6.6 Engines for Caterpillar Built Machines Fuel Priming Pump
279C, 279C2, 289C, 289C2 and 299C Compact Track Loaders, 287C, 277C, 277C2, 287C2 and 297C Multi Terrain Loaders and 246C, 256C, 262C, 262C2 and 272C Skid Steer Loaders Machine Electronic Control System Calibration
2006/06/26 An Improved Hose Routing for the Heater and Air Conditioner is Now Available on Reclaimer Mixers {1808, 1812}
568 Forest Machine Machine System Specifications Front Idler
R1700G Load Haul Dump Fire Suppression System (Dry Powder) - If Equipped
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.