2014/08/14 Caterpillar


Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}

Usage:

D3400 01T
Caterpillar Products
All
Engine
C9 (S/N: C9S1-UP)
Service Magazine, SEPD1827, 01, August 2014, "Do Not Reuse the Hold Down Bolts for the Fuel Injector". Disregard this previous article. See the article that follows.

Do not reuse the hold down bolts for the fuel injector. Hold down bolts that are reused could damage the engine. When you service the electronic unit injector, replace the hold down bolts.

Caterpillar Information System:

2006/05/29 Do Not Reuse the Hold Down Bolts for the Fuel Injector {1290}
C4.4 Industrial Engine Air Inlet and Exhaust System - Inspect
Filtration Procedure for Transmission Oil on Motor Graders Without Ecology Drain {0680, 0768, 3030} Filtration Procedure for Transmission Oil on Motor Graders Without Ecology Drain {0680, 0768, 3030}
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Maintenance Bypass Controller PWA
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Modbus Network - Setup
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Rotor Position Sensor - Calibrate
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Zig Zag Thyristor (MMS System Cabinet)
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Zig Zag Overload Relay (MMS System Cabinet)
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Zig Zag Circuit Breaker (MMS System Cabinet)
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Zig Zag Controller PWA (MMS System Cabinet)
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Zig Zag Contactor (MMS System Cabinet)
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Zig Zag Transformer (MMS System Cabinet)
2006/06/01 Do Not Reuse the Hold Down Bolts for the Fuel Injector {1290}
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Ethernet - Configure
C7 and C9 On-Highway Engines Engine Monitoring Parameters
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Maintenance Power Supply PWA
2006/05/29 Radiator pedestal on 1104C-TAG engines: Smaller engine mounting holes for improved accuracy of the fan position in the radiator cowl. {1353}
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Remote Input/Output Dry Contact - Setup
2006/06/01 New Connecting Rod and Main Bearings {1203, 1218, 1230}
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Time Delay Relay
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Transformer (Maintenance Bypass Cabinet)
TA19-M2WD and TA19-M4WD Agricultural Transmissions Transmission Oil Sample - Obtain
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Cable Landing (Maintenance Bypass Cabinet)
C9 Engine for Caterpillar Built Machines Camshaft - Remove
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.