Transmission and Scavenge Oil Pump - Disassemble
解体步骤
Show/hide table
| 需要的工具 | |||
| 工具 | 零件号 | 零件名称 | 数量 |
| A | 1P-1861 | 挡圈钳 | 1 |
| B | 1P-1863 | 挡圈钳 | 1 |
| C | 1P-0510 | 冲头组件 | 1 |
开始:
- 卸下变速箱和扫油泵。 请参阅解体和组装, "变速箱和扫油泵 - 拆卸"。
Show/hide table
| 注意 |
|---|
在检验、保养、测试、调整及维修发动机时，请小心确保盛接流出的液体。 在打开或拆解任何储有液体的部件之前，要准备好合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上的液体的工具和供应品，请参阅专门出版物, NENG2500, "卡特彼勒代理商工具目录"。 按照本地法规和条例处置所有液体。 |
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 卸下六角头螺钉 (2) ，从歧管 (1) 上卸下齿轮 (3) 。
Show/hide table
 | |
| 图 1 | g00766887 |
- 使用工具 (A) 卸下挡圈 (4) 。
Show/hide table
 | |
| 图 2 | g00766896 |
- 从歧管 (1) 上卸下螺栓 (5) 和盖 (6) 。
- 从轴 (8) 上卸下月牙键 (7) ，从盖 (6) 上卸下轴组件。
Show/hide table
 | |
| 图 3 | g00766899 |
- 从盖 (6) 上卸下轴承 (9) 。
- 从轴 (8) 上卸下密封 (10) 。
Show/hide table
 | |
| 图 4 | g00766903 |
注: 在密封拆卸过程中必须小心，以防密封断裂。
- 使用工具 (B) ，卸下将轴承 (12) 固定到位的挡圈 (11) 。
- 使用工具 (C) 和适当的压具，分离轴承 (12) 与轴 (8) 。
Show/hide table
 | |
| 图 5 | g00766909 |
- 从歧管 (1) 上卸下齿轮 (13) 和齿轮 (14) 。
Show/hide table
 | |
| 图 6 | g00766912 |
- 从歧管 (1) 上卸下轴承 (15) 。
Show/hide table
 | |
| 图 7 | g00766915 |
Caterpillar Information System:
TH31 Well Servicing Transmissions Transmission and Torque Converter - Connect
3512B Oil Well Servicing Engine (ADEM III) Electrical Power Supply
C175 Generator Set Engines Idler Gears (Front) - Remove and Install
2006/01/02 New Bevel Gear And Pinions And Associated Components Provide Increased Service Life {3254, 3256}
EMCP3 MUI Engine Monitoring and Control
C6.6 Engines for Caterpillar Built Machines Fuel System
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Transmission Drive Plate - C-15 and C15 Engines
3512B Oil Well Servicing Engine (ADEM III) Ether Injection System
C6.6 Engines for Caterpillar Built Machines General Information
2005/12/19 Welding On Fuel And Hydraulic Tanks {0353, 0679, 1273, 5056, 7000}
3500B Engines Fuel Cooler - Remove and Install
CX31 On-Highway Transmission Power Train Modulating Valve (Transmission Clutch) - Remove and Install
2006/02/20 New Supplier for Glow Plugs {1412}
C6.6 Engines for Caterpillar Built Machines Electronic Control System Components
TH31 Well Servicing Transmissions Transmission Planetary - Assemble
TH31 Well Servicing Transmissions Transmission and Scavenge Oil Pump - Remove
TH31 Well Servicing Transmissions Transmission and Scavenge Oil Pump - Install
TH31 Well Servicing Transmissions Transmission and Scavenge Oil Pump - Assemble
TH31 Well Servicing Transmissions Pump Drive - Assemble
C3.3 Industrial Engine Electric Starting Motor - Remove and Install
C3.3 Industrial Engine Fan - Remove and Install
C3.3 Industrial Engine Glow Plugs - Remove and Install - If Equipped
TH35 Well Servicing Transmissions Transmission Planetary - Assemble
3126B and 3126E Truck Engines Vibration Damper