Drive Plate - C-15 and C15 Engines
Show/hide table
 | |
| Illustration 1 | g01228987 |
(1) Sparingly apply 5P-3931 Anti-Seize Compound to the bore of the crankshaft adapter.
(2) Apply 155-0695 Thread Lock Compound to the 6V-8200 Bolt .
(3) Torque the 6V-8200 Bolt to the following torque. ... 120 to 125 N·m (88 to 92 lb ft)
(4) Torque the 8T-1158 Bolt to the following torque. ... 28 ± 7 N·m (21 ± 5 lb ft)
Caterpillar Information System:
3512B Oil Well Servicing Engine (ADEM III) Ether Injection System
C6.6 Engines for Caterpillar Built Machines General Information
2005/12/19 Welding On Fuel And Hydraulic Tanks {0353, 0679, 1273, 5056, 7000}
3500B Engines Fuel Cooler - Remove and Install
CX31 On-Highway Transmission Power Train Modulating Valve (Transmission Clutch) - Remove and Install
3500 Locomotive Engines Turbocharger
C175 Generator Set Engines Prelubrication Oil Pump - Remove and Install
3500 Engines Fan Drive - Assemble
C1.5 and C2.2 Engines for Caterpillar Built Marine Generator Sets Gear Group (Front)
C7 Urban Transit Bus Engines Refill Capacities and Recommendations
3126B and 3126E Truck Engines Cylinder Block
3500 Engines Fan Drive - Disassemble
C6.6 Engines for Caterpillar Built Machines Fuel System
EMCP3 MUI Engine Monitoring and Control
2006/01/02 New Bevel Gear And Pinions And Associated Components Provide Increased Service Life {3254, 3256}
C175 Generator Set Engines Idler Gears (Front) - Remove and Install
3512B Oil Well Servicing Engine (ADEM III) Electrical Power Supply
TH31 Well Servicing Transmissions Transmission and Torque Converter - Connect
TH31 Well Servicing Transmissions Transmission and Scavenge Oil Pump - Disassemble
2006/02/20 New Supplier for Glow Plugs {1412}
C6.6 Engines for Caterpillar Built Machines Electronic Control System Components
TH31 Well Servicing Transmissions Transmission Planetary - Assemble
TH31 Well Servicing Transmissions Transmission and Scavenge Oil Pump - Remove
TH31 Well Servicing Transmissions Transmission and Scavenge Oil Pump - Install