3500B Engines Caterpillar


Fuel Cooler - Remove and Install

Usage:

3516B 9F2

拆卸步骤

开始:

  1. 拆下风扇驱动装置。 请参阅拆解和组装, "风扇驱动装置 - 拆卸"。

注: 冷却系统的部件和重量可能根据您的配置总成而有所变化。


注意

在检验、保养、测试、调整及维修发动机时,请小心确保盛接流出的液体。 在打开或拆解任何储有液体的部件之前,要准备好合适的容器收集液体。

有关适合收集和盛接卡特彼勒产品上的液体的工具和供应品,请参阅专门出版物, NENG2500, "卡特彼勒代理商工具目录"。

按照本地法规和条例处置所有液体。


------ WARNING! ------

渗漏或溅溢到热表面或电气部件上的燃油会引起失火。 为防止可能的伤害,当更换燃油滤清器或油水分离器滤芯时,要将起动开关断开。 应立即将溅溢的燃油清除干净。


  1. 把供油开关转到关闭位置。



    图 1g01228895

  1. 拆下软管组件 (1) 。



    图 2g01228896

  1. 将适当的起吊设备固定到安装支架 (2) 和燃油冷却器 (3) 。 安装支架 (2) 和燃油冷却器 (3) 的干重约为18kg (40lb)。 拆下螺栓 (4) 以便拆下安装支架 (2) 和燃油冷却器 (3) 。



    图 3g01228901

  1. 拆下螺栓 (5) 以拆卸油冷却器 (3) 。

安装步骤




    图 4g01228901

  1. 将燃油冷却器 (3) 放置到位,并安装螺栓 (5) 。



    图 5g01228896

  1. 将适当的起吊设备连接到安装支架 (2) 和燃油冷却器 (3) 。 安装支架 (2) 和燃油冷却器 (3) 的干重约为18kg (40lb)。 将安装支架 (2) 和燃油冷却器 (3) 放置到位。 安装螺栓 (4) 。



    图 6g01228895

  1. 安装软管组件 (1) 。

  1. 将供油开关置于接通位置。

End By: 安装风扇驱动装置。 请参阅 拆解和组装, "风扇驱动装置 - 安装"。

Caterpillar Information System:

CX31 On-Highway Transmission Power Train Modulating Valve (Transmission Clutch) - Remove and Install
3500 Locomotive Engines Turbocharger
C175 Generator Set Engines Prelubrication Oil Pump - Remove and Install
3500 Engines Fan Drive - Assemble
C1.5 and C2.2 Engines for Caterpillar Built Marine Generator Sets Gear Group (Front)
C7 Urban Transit Bus Engines Refill Capacities and Recommendations
3126B and 3126E Truck Engines Cylinder Block
3500 Engines Fan Drive - Disassemble
C175-16 and C175-20 Engines for Caterpillar Built Machines Electronic Unit Injector Sleeve - Install
3512B Oil Well Servicing Engine (ADEM III) Sensor Supply
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Transmission Drive Plate - C-9, C9, C-10, C11, and C13 Engines
3500 Engines Fan Drive - Install
2005/12/19 Welding On Fuel And Hydraulic Tanks {0353, 0679, 1273, 5056, 7000}
C6.6 Engines for Caterpillar Built Machines General Information
3512B Oil Well Servicing Engine (ADEM III) Ether Injection System
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Transmission Drive Plate - C-15 and C15 Engines
C6.6 Engines for Caterpillar Built Machines Fuel System
EMCP3 MUI Engine Monitoring and Control
2006/01/02 New Bevel Gear And Pinions And Associated Components Provide Increased Service Life {3254, 3256}
C175 Generator Set Engines Idler Gears (Front) - Remove and Install
3512B Oil Well Servicing Engine (ADEM III) Electrical Power Supply
TH31 Well Servicing Transmissions Transmission and Torque Converter - Connect
TH31 Well Servicing Transmissions Transmission and Scavenge Oil Pump - Disassemble
2006/02/20 New Supplier for Glow Plugs {1412}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.