Prelubrication Oil Pump - Remove and Install
拆卸步骤
Show/hide table
| 注意 |
|---|
在检验、保养、测试、调整及维修发动机时，请小心确保盛接流出的液体。 在打开或拆解任何储有液体的部件之前，要准备好合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上的液体的工具和供应品，请参阅专门出版物, NENG2500, "卡特彼勒代理商工具目录"。 按照本地法规和条例处置所有液体。 |
- 从预润滑泵 (1) 上断开软管组件 (2) 和 (3) 。
Show/hide table
 | |
| 图 1 | g01554613 |
- 断开线束组件 (4) 和 (5) 。 拆卸螺母 (7) 、垫圈和螺栓 (6) 。 拆卸预润滑泵 (1) 。 预润滑泵 (1) 的重量约为 21 kg (45 lb)。 将适当起吊设备连接至支架 (10) 。 支架 (10) 的重量约为 47 kg (102 lb)。 拆下螺母 (8) 、螺栓 (9) 和垫圈。 卸下支架 (10) 。
Show/hide table
 | |
| 图 2 | g01554615 |
安装步骤
- 将适当的起吊设备固定到支架 (10) 上。 支架 (10) 的重量约为 47 kg (102 lb)。 定位支架 (10) 。 安装垫圈、螺栓 (9) 和螺母 (8) 。
Show/hide table
| | |
| 图 3 | g01554615 |
- 安置预润滑泵 (1) 。 安装螺栓 (6) 、垫圈和螺母 (7) 。
- 连接线束组件 (4) 和 (5) 。
- 将软管组件 (2) 和 (3) 连接到预润滑泵 (1) 上。
Show/hide table
| | |
| 图 4 | g01554613 |
Caterpillar Information System:
3500 Engines Fan Drive - Assemble
C1.5 and C2.2 Engines for Caterpillar Built Marine Generator Sets Gear Group (Front)
C7 Urban Transit Bus Engines Refill Capacities and Recommendations
3126B and 3126E Truck Engines Cylinder Block
3500 Engines Fan Drive - Disassemble
C175-16 and C175-20 Engines for Caterpillar Built Machines Electronic Unit Injector Sleeve - Install
3512B Oil Well Servicing Engine (ADEM III) Sensor Supply
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Transmission Drive Plate - C-9, C9, C-10, C11, and C13 Engines
3500 Engines Fan Drive - Install
C175-16 and C175-20 Engines for Caterpillar Built Machines Electronic Unit Injector Sleeve - Remove
CX31 On-Highway Transmission Power Train Relief Valve (Torque Converter Inlet) - Remove and Install
3512B Oil Well Servicing Engine (ADEM III) Pulse Width Modulated Sensor
3500 Locomotive Engines Turbocharger
CX31 On-Highway Transmission Power Train Modulating Valve (Transmission Clutch) - Remove and Install
3500B Engines Fuel Cooler - Remove and Install
2005/12/19 Welding On Fuel And Hydraulic Tanks {0353, 0679, 1273, 5056, 7000}
C6.6 Engines for Caterpillar Built Machines General Information
3512B Oil Well Servicing Engine (ADEM III) Ether Injection System
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Transmission Drive Plate - C-15 and C15 Engines
C6.6 Engines for Caterpillar Built Machines Fuel System
EMCP3 MUI Engine Monitoring and Control
2006/01/02 New Bevel Gear And Pinions And Associated Components Provide Increased Service Life {3254, 3256}
C175 Generator Set Engines Idler Gears (Front) - Remove and Install
3512B Oil Well Servicing Engine (ADEM III) Electrical Power Supply