Drive Plate - C-9, C9, C-10, C11, and C13 Engines
Show/hide table
 | |
| Illustration 1 | g01228787 |
(1) Sparingly apply 5P-3931 Anti-Seize Compound to the bore of the crankshaft adapter.
(2) Apply 155-0695 Thread Lock Compound to the 6V-8200 Bolt .
(3) Torque the 6V-8200 Bolt to the following torque. ... 120 to 125 N·m (88 to 92 lb ft)
(4) Torque the 8T-1158 Bolt to the following torque. ... 28 ± 7 N·m (20 ± 5 lb ft)
Caterpillar Information System:
3500 Engines Fan Drive - Install
C175-16 and C175-20 Engines for Caterpillar Built Machines Electronic Unit Injector Sleeve - Remove
CX31 On-Highway Transmission Power Train Relief Valve (Torque Converter Inlet) - Remove and Install
3512B Oil Well Servicing Engine (ADEM III) Pulse Width Modulated Sensor
C7 Marine Engine Electric Starting Motor
C7 Marine Engine Electric Starting Motor
3512B Oil Well Servicing Engine (ADEM III) Speed Control
C6.6 Generator Sets Plate Locations and Film Locations
C175 Generator Set Engines Camshaft - Install
CX31 On-Highway Transmission Power Train Gear Pump (Torque Converter and Transmission) - Install
2008/02/11 New Injectors are Being Offered in Place of Remanufactured Injectors {1290}
320D and 323D Excavators Machine System Specifications Main Control Valve
3512B Oil Well Servicing Engine (ADEM III) Sensor Supply
C175-16 and C175-20 Engines for Caterpillar Built Machines Electronic Unit Injector Sleeve - Install
3500 Engines Fan Drive - Disassemble
3126B and 3126E Truck Engines Cylinder Block
C7 Urban Transit Bus Engines Refill Capacities and Recommendations
C1.5 and C2.2 Engines for Caterpillar Built Marine Generator Sets Gear Group (Front)
3500 Engines Fan Drive - Assemble
C175 Generator Set Engines Prelubrication Oil Pump - Remove and Install
3500 Locomotive Engines Turbocharger
CX31 On-Highway Transmission Power Train Modulating Valve (Transmission Clutch) - Remove and Install
3500B Engines Fuel Cooler - Remove and Install
2005/12/19 Welding On Fuel And Hydraulic Tanks {0353, 0679, 1273, 5056, 7000}