C6.6 Generator Sets Caterpillar


Plate Locations and Film Locations

Usage:

C6.6 N6D



Illustration 1g01144128

Location of the serial number plate

Serial Number Plate (1)

The engine serial number plate is located on the left side of the cylinder block to the rear of the front engine mounting.

Caterpillar dealers need all of these numbers in order to determine the components that were included with the engine.




Illustration 2g01159926

Serial number plate

Emissions Certification Film

Note: This information is pertinent in the United States, in Canada and in Europe.

A typical example is shown.




Illustration 3g00776690

This information is pertinent in the United States and in Canada.




Illustration 4g01159950

Typical example

Caterpillar Information System:

C175 Generator Set Engines Camshaft - Install
CX31 On-Highway Transmission Power Train Gear Pump (Torque Converter and Transmission) - Install
2008/02/11 New Injectors are Being Offered in Place of Remanufactured Injectors {1290}
320D and 323D Excavators Machine System Specifications Main Control Valve
CX31 On-Highway Transmission Power Train Gear Pump (Torque Converter and Transmission) - Remove
3512B Oil Well Servicing Engine (ADEM III) Emergency Stop Switch
C7 Marine Engine Jacket Water Heater
C7 Marine Engine Crankshaft Pulley
C7 Marine Engine Exhaust Elbow
2013/08/21 Reminder for Troubleshooting Electronic Actuators {1130}
C7 Marine Engine Electronic Control Module
3512B Oil Well Servicing Engine (ADEM III) Coolant Temperature Is Too High
3512B Oil Well Servicing Engine (ADEM III) Speed Control
C7 Marine Engine Electric Starting Motor
C7 Marine Engine Electric Starting Motor
3512B Oil Well Servicing Engine (ADEM III) Pulse Width Modulated Sensor
CX31 On-Highway Transmission Power Train Relief Valve (Torque Converter Inlet) - Remove and Install
C175-16 and C175-20 Engines for Caterpillar Built Machines Electronic Unit Injector Sleeve - Remove
3500 Engines Fan Drive - Install
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Transmission Drive Plate - C-9, C9, C-10, C11, and C13 Engines
3512B Oil Well Servicing Engine (ADEM III) Sensor Supply
C175-16 and C175-20 Engines for Caterpillar Built Machines Electronic Unit Injector Sleeve - Install
3500 Engines Fan Drive - Disassemble
3126B and 3126E Truck Engines Cylinder Block
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.