Engine Oil Pump - Remove
Removal Procedure
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Remove bolts (1) .
Show/hide table
Illustration 1 | g01178037 |
- Remove bolts (2) .
- Remove elbow (3) from engine oil pump (4). Remove the O-ring seals from elbow (3) .
- Remove bolts (5) and engine oil pump (4) from the engine. Remove the O-ring seal from engine oil pump (4) .
Caterpillar Information System:
C9 Engine for Caterpillar Built Machines Cylinder Head - Install
C15 and C18 Engines for Caterpillar Built Machines Gear Group (Front)
C15 and C18 Engines for Caterpillar Built Machines Valve Rocker Arm
C2.2 Generator Sets Starting the Engine
C15 and C18 Engines for Caterpillar Built Machines Electronic Unit Injector Rocker Arm
2006/02/06 A New Exhaust Manifold Gasket is Used {1059}
C15 On-Highway Engine Electronic Unit Injector
C9 Engine for Caterpillar Built Machines Cylinder Head - Remove
C9 Engine for Caterpillar Built Machines Turbocharger - Install
C13 On-highway Engine Front Housing and Covers
C9 Engine for Caterpillar Built Machines Turbocharger - Remove
C15 On-Highway Engine Crankshaft
C280 Marine and Petroleum Engines Engine Speed/Timing Sensor
C3.3 and C4.4 Rental Generator Sets Stopping the Engine
C6.6 Industrial Engine Introduction
C-10 Petroleum Engine Engine Oil Pump - Disassemble
Filtration Procedure for Hydraulic Oil in Compact Equipment {0680, 0768, 5050, 5056} Filtration Procedure for Hydraulic Oil in Compact Equipment {0680, 0768, 5050, 5056}
C-10 Petroleum Engine Engine Oil Pump - Assemble
C-10 Petroleum Engine Engine Oil Pump - Install
C18 Marine Engines Engine Oil Level Gauge - Calibrate
C13 On-highway Engine Water Pump
C13 Engine for Combat and Tactical Vehicles Atmospheric Pressure Sensor
C-10 Petroleum Engine Flywheel - Remove
C-10 Petroleum Engine Flywheel - Install