Two New Tools Check Tension on Engine Belts {0701, 0767}
- Caterpillar Products: All
- 3500B Engines
- Caterpillar Products: Machine Engines
- 3500B Series
- All 3500 Series
- Caterpillar Products:
- 3500 Family Generator Sets and Power Modules
- 3500 Family Pumpers
- G3500 Family Generator Sets and Power Modules
- Engine: Commercial
- 3500 Family All
- Engine: Generator Set
- 3500 Series
- Engine: Marine
- 3500 Series
- 3500B Engines
Show/hide table
 | |
| Illustration 1 | g01047000 |
Two belt tension gauges allow the technician to check the tension of belts for air compressors, air conditioning compressors, alternators, water pumps and other belt driven attachments on the above engines. The 144-0235 Belt Tension Gauge works on A section belts with a top width of 9.0 to 13.0 mm (0.35 to 0.51 inch) and K section poly V-belts, four, five and six rib belts. The 240-8220 Belt Tension Gauge works on A section belts with a top width of 9.7 to 31.8 mm (0.38 to 1.25 inch) and K section poly V-belts and eight rib belts.
Features and Benefits
- Compensating feature for the belt thickness increases accuracy.
- The belt tension gauges have permanent dial decals.
- Use of the tool helps eliminate belt slippage.
Show/hide table
| Specifications | ||
| 140-0235 Belt Tension Gauge | 240-8220 Belt Tension Gauge | |
| Overall size | 102 to 203 mm (4.0 to 8.0 inch) |
102 to 203 mm (4.0 to 8.0 inch) |
| Leg span | 82.6 mm (3.25 inch) |
- |
| Weight | 400 g (0.88 lb) |
570 g (1.26 lb) |
| Accuracy | ± 10% | ± 5% |
| Range | 130 to 800 N (29.2 to 179.8 lb) |
445 to 890 N (100.04 to 200.08 lb) |
Caterpillar Information System:
C32 Marine Engine Cylinder Head
C27 and C32 Engines Vibration Damper - Check
C27 and C32 Engines Cooling System - Inspect
C32 Marine Engines Excessive Engine Oil Consumption - Inspect
C27 and C32 Engines Engine Crankcase Pressure (Blowby) - Test
C7 Marine Engine Exhaust Manifold
C27 and C32 Engines Turbocharger - Inspect
C7 Marine Engine Heat Exchanger
2004/04/01 Timing Light Group Helps Adjust Timing for Spark Ignited Engines {0712, 0785}
2004/03/15 New Tool Helps Configure Engine Speed Controller and Adjust Engine Speed Controller {0778, 0781}
2004/02/16 Hydraulically Fractured Connecting Rods are Now In Production for 3054, 3054B, 3054C, 3054E and 3056E Engines {1218}
2004/03/01 Hydraulically Fractured Connecting Rods are Now In Production for 3054, 3054B, 3054C, 3054E and 3056E Engines {1218}
Field Installation Procedure for Redundant Electronic Overspeed Protection{1915} Field Installation Procedure for Redundant Electronic Overspeed Protection{1915}
G3500 Engines Diagnostic Code Will Not Clear
G3500 Engines Electronic Service Tool Displays UNDETERMINED
G3500 Engines Electronic Service Tool Will Not Communicate with ECM
G3500 Engines Engine Coolant Temperature (High)
G3500 Engines Engine Coolant Temperature (Low)
G3500 Engines Diagnostic Codes
G3500 Engines Engine Shutdown without a Diagnostic Code
C9 Marine Auxiliary and Marine Generator Set Engines CID 0261 FMI 11 Engine Timing Offset fault
C9 Marine Auxiliary and Marine Generator Set Engines CID 0042 FMI 08 Injector Actuation Valve signal abnormal
C15 and C18 Industrial Engines Pump Drive - Remove
C15 and C18 Industrial Engines Pump Drive - Install