Coolant Temperature Sensor
Show/hide table
Illustration 1 | g01448293 |
(1) Sensor assembly
- Torque ...
20 ± 3 N·m (15 ± 2 lb ft)
(2) Plug with socket A, socket B, and socket C.
Caterpillar Information System:
2003/12/01 A New Oil Filler Tube and New Oil Filler Cap are Now Available {1316}
2003/12/01 A New Oil Filler Tube and New Oil Filler Cap Are Now Available {1316}
C9 Marine Auxiliary and Marine Generator Set Engines System Configuration Parameters
C12 Marine Engines Gauges and Indicators
C9 Marine Auxiliary and Marine Generator Set Engines Sensors and Electrical Connectors
Oxidation Catalyst Converter for Stationary Engines and Non-Road Mobile Engines {1091} Oxidation Catalyst Converter for Stationary Engines and Non-Road Mobile Engines {1091}
SPP101 Skid Mounted Pumper Refill Capacities
General Welding Procedures {0679, 7000} General Welding Procedures {0679, 7000}
2003/12/01 Special Instruction for Testing Oil Coolers {1378}
C-15 Petroleum Engine Flywheel Housing
2003/12/01 New Seal for the Ignition Transformer Tube {1561}
C1.5 and C2.2 Marine Generator Set Engines Crankshaft Rear Seal - Install
3612 and 3616 Engines Piston and Rings - Three Ring Piston
2005/10/31 Improved Pistons Are Used for Certain 3600 and C280 Engines {1214, 1216}
C-10 Petroleum Engine Cylinder Head Valves
C-10 Petroleum Engine Cylinder Liner
C-10 Petroleum Engine Connecting Rod Bearing Journal
C-10 Petroleum Engine Connecting Rod
C-10 Petroleum Engine Piston and Rings
C32 Marine Engine Cylinder Liner Projection - Inspect
G3500 Engines Pressure Sensor
EMCP3 Electronic Control Module (Generator Set) - Configure
2004/05/17 New Tooling Loosens Multiple Studs or Tooling Tightens Multiple Studs for the Cylinder Head or for the Main Bearing Cap {0701, 0703, 0705}
3056E Industrial Engine Engine Oil Pressure - Test