2003/12/01 Caterpillar


A New Oil Filler Tube and New Oil Filler Cap are Now Available {1316}

Usage:

3406E 1LW
Engine:
3126B (S/N: 8SZ1-UP; BKD1-UP; 8YL1-UP; 7AS1-UP)
3406B (S/N: 7FB1-UP)
3406C (S/N: 8PN1-UP; 4MG1-UP; 5KJ1-UP)
3406E (S/N: 2WS1-UP; 5DS1-UP; 6TS1-UP; 1LW1-UP; 1MM1-UP)
C-10 (S/N: MBJ1-UP; 2PN1-UP; 3CS1-UP; 8YS1-UP)
C-12 (S/N: MBL1-UP; 9SM1-UP; 1YN1-UP; 2KS1-UP; 9NS1-UP)
C-15 (S/N: MBN1-UP; 6NZ1-UP)
C-16 (S/N: 7CZ1-UP)
C-18 (S/N: MDP1-UP)
C11 (S/N: KCA1-UP)
C13 (S/N: KCB1-UP)
C15 (S/N: BXS1-UP)
3176 (S/N: 2YG1-UP; 7LG1-UP)
3176B (S/N: 9CK1-UP)
3406E (S/N: 5EK1-UP)
C18 (S/N: MEP1-UP)
C7 (S/N: KAL1-UP)
Truck Engines:
3126E (S/N: DPF1-UP; LEF1-UP; CKM1-UP; CRP1-UP; HEP1-UP; 9SZ1-UP)

A new oil filler tube and oil filler cap are now available. The combination of the new oil filler tube and the new oil filler cap will improve retention of the oil filler cap.

The new 241-2942 Oil Tube Assembly replaces the older 7E-4035 Oil Filler Tube. The new 241-5645 Filler Cap or the 068-4497 Filler Cap should be used with the new 241-2942 Oil Tube Assembly. The new oil fill cap can only be used with the older oil filler tube if the current oil fill cap seems loose, or if the oil fill cap will not stay secured.

Caterpillar Information System:

2003/12/01 A New Oil Filler Tube and New Oil Filler Cap Are Now Available {1316}
C9 Marine Auxiliary and Marine Generator Set Engines System Configuration Parameters
C12 Marine Engines Gauges and Indicators
C9 Marine Auxiliary and Marine Generator Set Engines Sensors and Electrical Connectors
Oxidation Catalyst Converter for Stationary Engines and Non-Road Mobile Engines {1091} Oxidation Catalyst Converter for Stationary Engines and Non-Road Mobile Engines {1091}
SPP101 Skid Mounted Pumper Refill Capacities
General Welding Procedures {0679, 7000} General Welding Procedures {0679, 7000}
2003/12/01 Special Instruction for Testing Oil Coolers {1378}
C-15 Petroleum Engine Flywheel Housing
2003/12/01 New Seal for the Ignition Transformer Tube {1561}
C1.5 and C2.2 Marine Generator Set Engines Crankshaft Rear Seal - Install
2004/07/01 Procedure for Cylinder Head Bolt Tightening {1100}
C32 Marine Engine Coolant Temperature Sensor
3612 and 3616 Engines Piston and Rings - Three Ring Piston
2005/10/31 Improved Pistons Are Used for Certain 3600 and C280 Engines {1214, 1216}
C-10 Petroleum Engine Cylinder Head Valves
C-10 Petroleum Engine Cylinder Liner
C-10 Petroleum Engine Connecting Rod Bearing Journal
C-10 Petroleum Engine Connecting Rod
C-10 Petroleum Engine Piston and Rings
C32 Marine Engine Cylinder Liner Projection - Inspect
G3500 Engines Pressure Sensor
EMCP3 Electronic Control Module (Generator Set) - Configure
2004/05/17 New Tooling Loosens Multiple Studs or Tooling Tightens Multiple Studs for the Cylinder Head or for the Main Bearing Cap {0701, 0703, 0705}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.