Sensors and Electrical Connectors
Show/hide table
Illustration 1 | g01172951 |
Show/hide table
Illustration 2 | g01038063 |
Typical component locations |
Show/hide table
Illustration 3 | g01173430 |
Typical component locations |
Show/hide table
Illustration 4 | g00693506 |
ECM and harness connectors |
Show/hide table
Illustration 5 | g00766364 |
Customer connector (40 pin) |
Caterpillar Information System:
Oxidation Catalyst Converter for Stationary Engines and Non-Road Mobile Engines {1091} Oxidation Catalyst Converter for Stationary Engines and Non-Road Mobile Engines {1091}
SPP101 Skid Mounted Pumper Refill Capacities
General Welding Procedures {0679, 7000} General Welding Procedures {0679, 7000}
2003/12/01 Special Instruction for Testing Oil Coolers {1378}
C-15 Petroleum Engine Flywheel Housing
2003/12/01 New Seal for the Ignition Transformer Tube {1561}
C1.5 and C2.2 Marine Generator Set Engines Crankshaft Rear Seal - Install
2004/07/01 Procedure for Cylinder Head Bolt Tightening {1100}
3126E Truck Engines Refill Capacities and Recommendations
C-15 Petroleum Engine Exhaust Manifold
C1.5 and C2.2 Marine Generator Set Engines Water Temperature Regulator - Remove and Install
3126E and 3126B Commercial and Truck Engines Engine Oil Level Gauge - Calibrate
C12 Marine Engines Gauges and Indicators
C9 Marine Auxiliary and Marine Generator Set Engines System Configuration Parameters
2003/12/01 A New Oil Filler Tube and New Oil Filler Cap Are Now Available {1316}
2003/12/01 A New Oil Filler Tube and New Oil Filler Cap are Now Available {1316}
C32 Marine Engine Coolant Temperature Sensor
3612 and 3616 Engines Piston and Rings - Three Ring Piston
2005/10/31 Improved Pistons Are Used for Certain 3600 and C280 Engines {1214, 1216}
C-10 Petroleum Engine Cylinder Head Valves
C-10 Petroleum Engine Cylinder Liner
C-10 Petroleum Engine Connecting Rod Bearing Journal
C-10 Petroleum Engine Connecting Rod
C-10 Petroleum Engine Piston and Rings