SPP101 Skid Mounted Pumper Caterpillar


Refill Capacities

Usage:

SPP101 715

Lubrication System

The refill capacities for the engine crankcase reflect the approximate capacity of the crankcase or sump plus standard oil filters. Refer to the Operation and Maintenance Manual, "Lubricant Specifications" (Maintenance Section) for more information.

Table 1
3126B
Approximate Refill Capacities    
Compartment or System     Liters     Quarts    
Shallow Oil Sump (1)     21     23    
Deep Oil Sump (1)     31     33    
( 1 ) These values are the approximate capacities for the crankcase oil sump which include the standard oil filters that are installed at the factory. Engines with auxiliary oil filters will require additional oil.



Illustration 1g00808467

(1) Shallow oil sump

(2) Deep oil sump (Aluminum)

(3) Deep oil sump (Stamped steel)

Cooling System

To maintain the cooling system, the cooling system capacity must be known. Refer to the Operation and Maintenance Manual, "Cooling System Specifications" (Maintenance Section) for more information.

Table 2
3126B
Approximate Refill Capacities    
Compartment or System     Liters     Quarts    
Cooling System     30     32    

Caterpillar Information System:

General Welding Procedures {0679, 7000} General Welding Procedures {0679, 7000}
2003/12/01 Special Instruction for Testing Oil Coolers {1378}
C-15 Petroleum Engine Flywheel Housing
2003/12/01 New Seal for the Ignition Transformer Tube {1561}
C1.5 and C2.2 Marine Generator Set Engines Crankshaft Rear Seal - Install
2004/07/01 Procedure for Cylinder Head Bolt Tightening {1100}
3126E Truck Engines Refill Capacities and Recommendations
C-15 Petroleum Engine Exhaust Manifold
C1.5 and C2.2 Marine Generator Set Engines Water Temperature Regulator - Remove and Install
3126E and 3126B Commercial and Truck Engines Engine Oil Level Gauge - Calibrate
C32 Marine Engine Gear Group (Front) - Time
G3500 Engines Desired Engine Speed Signal
Oxidation Catalyst Converter for Stationary Engines and Non-Road Mobile Engines {1091} Oxidation Catalyst Converter for Stationary Engines and Non-Road Mobile Engines {1091}
C9 Marine Auxiliary and Marine Generator Set Engines Sensors and Electrical Connectors
C12 Marine Engines Gauges and Indicators
C9 Marine Auxiliary and Marine Generator Set Engines System Configuration Parameters
2003/12/01 A New Oil Filler Tube and New Oil Filler Cap Are Now Available {1316}
2003/12/01 A New Oil Filler Tube and New Oil Filler Cap are Now Available {1316}
C32 Marine Engine Coolant Temperature Sensor
3612 and 3616 Engines Piston and Rings - Three Ring Piston
2005/10/31 Improved Pistons Are Used for Certain 3600 and C280 Engines {1214, 1216}
C-10 Petroleum Engine Cylinder Head Valves
C-10 Petroleum Engine Cylinder Liner
C-10 Petroleum Engine Connecting Rod Bearing Journal
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.