Guide (Trench Cleaner) - Remove and Install
Removal Procedure
Show/hide table
Required Tools     | |||
Tool     | Pt. No.     | Description     | Qty     |
A     | 1P-1859     | Retaining Ring Pliers     | 1     |
Start By:
- Remove the trench cleaner plate. Refer to the Disassembly and Assembly Manual, "Plate (Trench Cleaner) - Remove and Install".
- Use Tooling (A) to remove two retaining rings (1) from pivot pins (2) for each of two guide rollers (3) .
Show/hide table
Illustration 1 | g01014242 |
- Remove pivot pins (2) from guide rollers (3) .
- Remove two guide rollers (3) .
Installation Procedure
Show/hide table
Required Tools     | |||
Tool     | Pt. No.     | Description     | Qty     |
A     | 1P-1859     | Retaining Ring Pliers     | 1     |
- Position upper guide roller (3) and install pivot pin (2) .
Show/hide table
Illustration 2 | g01014242 |
- Position lower guide roller (3) and install pivot pin (2) .
- Use Tooling (A) to install two retaining pins (1) on each of two pivot pins (2) .
End By: Install the trench cleaner plate. Refer to the Disassembly and Assembly Manual, "Plate (Trench Cleaner) - Remove and Install".
Caterpillar Information System:
321C LCR Excavator Machine Systems Drift Reduction Valve (Stick) - Install
321C LCR Excavator Machine Systems Drift Reduction Valve (Stick) - Remove
321C LCR Excavator Machine Systems Drift Reduction Valve (Boom) - Remove
321C LCR Excavator Machine Systems Drift Reduction Valve (Boom) - Install
M322C Excavator Hydraulic System Hydraulic System - Setup - Combined Function Valve
C27 and C32 Generator Set Engines Camshaft Bearings - Install
C27 and C32 Generator Set Engines Camshaft Bearings - Remove
3046 Engine for Caterpillar Built Machines Belt Tension Chart
2003/08/01 New Hose Improves the Drainage of Oil from the Turbocharger During a Continuous Prelube Cycle {1052}
2003/08/18 New Sleeve Bearings in the Oscillating Axle Trunnion Support Improve Service Life {3268, 7551}
Circuit Breaker Harness Assembly {1420} Circuit Breaker Harness Assembly {1420}
SW45 and SW60 Wheel Saws Frame (Front) - Remove and Install
SW45 and SW60 Wheel Saws Cable (Trench Cleaner) - Remove and Install
SW45 and SW60 Wheel Saws Plate (Trench Cleaner) - Remove and Install
2003/07/28 Disregard theService Magazine , "Correction to Systems Operation Testing and Adjusting , "Engine Speed Control"" {1931}
325C and 325C L Excavator Hydraulic System Oil Sample - Obtain
322C Excavator Safety Messages - Arrangement I
321C LCR Excavator Machine Systems Shuttle Valve - Remove - Auxiliary Control
321C LCR Excavator Machine Systems Shuttle Valve - Install - Auxiliary Control
321C LCR Excavator Machine Systems Swing Motor - Remove
321C LCR Excavator Machine Systems Swing Motor - Install
2003/09/22 Improved Air Cleaner Bracket for the 302.5 and 303.5 Mini Hydraulic Excavator {1051}
SW45 and SW60 Wheel Saws Wheel Saw Drum - Remove and Install
G3500B Engines Engine Protective Devices - Check