Camshaft Bearings - Remove
Show/hide table
Alat yang Diperlukan | |||
---|---|---|---|
Alat | Nomor Suku Cadang | Keterangan Suku Cadang | Jml |
A | 8S-2241 | Grup Alat Bearing Camshaft | 1 |
B | 9U-7222 | Pilot Bearing Camshaft | 1 |
8M-8778 | Stud Pengunci Tirus 1/2 - 13 x 1 9/16 in |
1 | |
C | 9U-7210 | Pelat Alat Penarik | 1 |
Dimulai dengan:
- Lepaskan camshaft. Rujuk ke Pembongkaran dan Pemasangan, "Camshaft - Pelepasan".
Show/hide table
PERHATIAN |
---|
Pastikan semua suku cadang bersih dari kontaminan. Kontaminan dapat menyebabkan keausan yang cepat dan mempersingkat umur komponen. |
- Lepaskan bearing camshaft No. 7 (belakang). Mulailah dari bagian belakang engine ke bagian depan engine.
- Pasang ujung kecil Alat (B) di bearing camshaft (1).
- Letakkan Alat (C) di atas Alat (A). Pasang Alat (A) melalui cylinder head pada Alat (B).
Catatan: Alat (C) dipasang di luar cylinder head. Alat (C) diperlukan untuk melepaskan semua bearing camshaft dari cylinder head.
- Gunakan Alat (A) untuk melepaskan bearing camshaft (1) dari cylinder head.
- Lepaskan Alat (B) dari Alat (A) dan lepaskan bearing camshaft.
Show/hide table
Ilustrasi 1 | g01159745 |
Caterpillar Information System:
C11 and C13 Engines Air Compressor Drive Gear - Remove and Install
3044C Industrial Engine and Engines for Caterpillar Built Machines Electric Starting Motor
3044C Industrial Engine and Engines for Caterpillar Built Machines Alternator and Regulator
3046 Engine for Caterpillar Built Machines Belt Tension Chart
2003/08/01 New Hose Improves the Drainage of Oil from the Turbocharger During a Continuous Prelube Cycle {1052}
G3500B Engines Compressor Bypass - Check
Circuit Breaker Harness Assembly {1420} Circuit Breaker Harness Assembly {1420}
3406E, C-10, C-12, C-15, C-16 Truck Engines Refill Capacities and Recommendations
C15 On-highway Engine Inlet and Exhaust Valve Springs - Remove and Install
C15 and C18 Generator Set Engines Cylinder Liner - Remove
C15 and C18 Generator Set Engines Cylinder Liner - Install
3126E and 3126B Commercial and Truck Engines Engine Oil and Filter - Change
C27 and C32 Generator Set Engines Camshaft Bearings - Install
C11 and C13 Engines Diverter Valve (Coolant) - Install
2003/08/01 Diagnosis of Failure of Exhaust Valve {1105}
G3406 Engines Camshaft
C11 and C13 Engines Precooler - Remove
3408E and 3412E Engines for Caterpillar Built Machines Cylinder Block
C11 and C13 Engines Precooler - Install
G3500B Engines Engine Crankcase Breather - Clean
C-15 On-Highway Engine Fuel Recirculation Valve - Remove and Install
G3500B Engines Engine Protective Devices - Check
2003/08/01 Update Caterpillar Electronic Technician (Cat ET) to the Newest Version {0785}
G3500B Engines Fuel Metering Valve - Check - Raptor