Cab - Install
- Attach a suitable lifting device onto the cab. The weight of the cab is approximately
261 kg (575 lb) . Use the suitable lifting device to position the cab onto the platform of the machine.Show/hide tableIllustration 2 g00975273 Show/hide tableIllustration 3 g01012978 Show/hide tableIllustration 4 g01012979 Show/hide tableIllustration 5 g01012981 - Install bolts (16). Tighten bolts (16) to a torque of
115 ± 10 N·m (85 ± 7 lb ft) .Show/hide tableIllustration 6 g01012975 - Connect hose (15) for the washer fluid.
Show/hide table
Illustration 7 g01012973 - Install duct (12) and (14). Install the screws (not shown). Install louvers (12).
Show/hide table
Illustration 8 g01012972 - Install cup holder (11).
Show/hide table
Illustration 9 g01012971 - Install duct (10).
Show/hide table
Illustration 10 g01012970 - Install cover (9) and bolts (8).
Show/hide table
Illustration 11 g01012968 - Connect harness assemblies (5), (6), and (7). Connect cable (4) for the radio antenna.
Show/hide table
Illustration 12 g01012967 - Position cover (3) and install bolts (1). Install floormat (2) into the cab.
Show/hide table
Illustration 1 | g01012977 |
Caterpillar Information System:
321C LCR Excavator Machine Systems Cab - Remove
Custom Product Support Literature for the Hydraulic Adjustment Procedure for the Long Reach Front on 320C L, 322C L, 325C L and 330C L Excavators{5050, 5117, 5456, 5458} Custom Product Support Literature for the Hydraulic Adjustment Procedure for the Long Reach Front on 320C L, 322C L, 325C L and 330C L Excavators{5050, 5117, 5456, 5458}
SW45 and SW60 Wheel Saws Frame (Rear) - Remove and Install
321C LCR Excavator Machine Systems Swivel - Install
321C LCR Excavator Machine Systems Swivel - Remove
2003/10/01 An Improved Alternator Belt is Used {1357}
2003/09/15 An Improved Alternator Belt is Used {1357}
M325D MH Material Handler Window Washer Reservoir - Fill
315C Excavator Machine Systems Boom Cylinder - Remove and Install
345B Excavator Hydraulic System Counterweight (Removal and Installation Hydraulic System)
2003/08/18 A New Egress Ladder is Used {7254, 7255}
315C Excavator Machine Systems Stick Cylinder - Remove and Install
SW45 and SW60 Wheel Saws Check Valve - Remove and Install
2003/08/01 A Previous High Temperature Locknut is Used in Engine Exhaust System Groups {7553}
321C LCR Excavator Machine Systems Undercarriage Frame - Remove
321C LCR Excavator Machine Systems Undercarriage Frame - Install
2003/11/24 Remanufactured Improved Travel Motors With Increased Service Life Are Now Available {5058}
SW45 and SW60 Wheel Saws Hydraulic Cylinder (Depth) - Remove and Install
G310B, G315B and G320B Demolition and Sorting Grapples Hydraulic Cylinder - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines Crankshaft - Remove
Standalone Installation of the Machine Security System (MSS) Medium Excavator{7631} Standalone Installation of the Machine Security System (MSS) Medium Excavator{7631}
2003/08/18 New Software is Available for the M300C Wheeled Excavators {7601, 7620}
SW45 and SW60 Wheel Saws Piston Motor - Remove
SW45 and SW60 Wheel Saws Piston Motor - Install