Cab - Remove
- Open the cab door. Lock the cab door in the OPEN position.
Show/hide table
Illustration 1 g01012967 - Remove bolts (1) and remove cover (3).
- Remove floormat (2) from the cab.
Show/hide table
Illustration 2 g01012968 - Disconnect harness assemblies (5), (6), and (7). Disconnect cable (4) for the radio antenna.
Show/hide table
Illustration 3 g01012970 - Remove bolts (8) and cover (9).
Show/hide table
Illustration 4 g01012971 - Remove duct (10).
Show/hide table
Illustration 5 g01012972 - Remove cup holder (11) by pulling straight up.
Show/hide table
Illustration 6 g01012973 - Remove louvers (12) in order to gain access to the screws (not shown). Remove the screws (not shown).
- Remove duct (13) and (14) in order to gain access to the bolts for the cab.
Show/hide table
Illustration 7 g01012975 - Disconnect hose (15) for the washer fluid.
Show/hide table
Illustration 8 g01012977 - Attach a suitable lifting device to the cab. The weight of the cab is approximately
261 kg (575 lb) .Show/hide tableIllustration 9 g00975273 Show/hide tableIllustration 10 g01012978 Show/hide tableIllustration 11 g01012979 Show/hide tableIllustration 12 g01012981 - Remove bolts (16).
- Remove the cab. The weight of the cab is approximately
261 kg (575 lb) .
Caterpillar Information System:
Custom Product Support Literature for the Hydraulic Adjustment Procedure for the Long Reach Front on 320C L, 322C L, 325C L and 330C L Excavators{5050, 5117, 5456, 5458} Custom Product Support Literature for the Hydraulic Adjustment Procedure for the Long Reach Front on 320C L, 322C L, 325C L and 330C L Excavators{5050, 5117, 5456, 5458}
SW45 and SW60 Wheel Saws Frame (Rear) - Remove and Install
321C LCR Excavator Machine Systems Swivel - Install
321C LCR Excavator Machine Systems Swivel - Remove
2003/10/01 An Improved Alternator Belt is Used {1357}
2003/09/15 An Improved Alternator Belt is Used {1357}
M325D MH Material Handler Window Washer Reservoir - Fill
315C Excavator Machine Systems Boom Cylinder - Remove and Install
345B Excavator Hydraulic System Counterweight (Removal and Installation Hydraulic System)
2003/08/18 A New Egress Ladder is Used {7254, 7255}
315C Excavator Machine Systems Stick Cylinder - Remove and Install
321C LCR Excavator Machine Systems Pilot Valve (Joystick) - Install
321C LCR Excavator Machine Systems Cab - Install
SW45 and SW60 Wheel Saws Check Valve - Remove and Install
2003/08/01 A Previous High Temperature Locknut is Used in Engine Exhaust System Groups {7553}
321C LCR Excavator Machine Systems Undercarriage Frame - Remove
321C LCR Excavator Machine Systems Undercarriage Frame - Install
2003/11/24 Remanufactured Improved Travel Motors With Increased Service Life Are Now Available {5058}
SW45 and SW60 Wheel Saws Hydraulic Cylinder (Depth) - Remove and Install
G310B, G315B and G320B Demolition and Sorting Grapples Hydraulic Cylinder - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines Crankshaft - Remove
Standalone Installation of the Machine Security System (MSS) Medium Excavator{7631} Standalone Installation of the Machine Security System (MSS) Medium Excavator{7631}
2003/08/18 New Software is Available for the M300C Wheeled Excavators {7601, 7620}
SW45 and SW60 Wheel Saws Piston Motor - Remove