2003/08/18 Caterpillar


A New Egress Ladder is Used {7254, 7255}

Usage:

5130B 4CS
Excavator:
5130B (S/N: 4CS199-UP)

Description of Change: A new egress ladder is located near the left side of the cab. This new ladder replaces the service ladder that was on the right side of the machine. The walkway was updated in order to accept the new ladder.

Adaptable To: The new 200-8245 Ladder (1) and the updated 106-4047 Walkway Gp are used instead of the former 123-9101 Ladder (A). The new 200-8245 Ladder and the updated 106-4047 Walkway Gp are effective with 5130B (S/N: 4CS199-UP) Excavator. This change is not adaptable to earlier Excavators.




Illustration 1g01012822

(A) 123-9101 Ladder




Illustration 2g01012748

(1) 200-8245 Ladder

Caterpillar Information System:

315C Excavator Machine Systems Stick Cylinder - Remove and Install
321C LCR Excavator Machine Systems Pilot Valve (Joystick) - Install
321C LCR Excavator Machine Systems Pilot Valve (Joystick) - Remove
321C LCR Excavator Machine Systems Pilot Valve (Travel) - Install
321C LCR Excavator Machine Systems Pilot Valve (Travel) - Remove
M325C Material Handler Final Drive Oil - Change
321C LCR Excavator Machine Systems Boom Lighting - Remove and Install
M325C Material Handler Operation Information
315C Excavator Machine Systems Bucket Cylinder - Remove and Install
C4.4 Industrial Engine Increased Engine Oil Temperature - Inspect
C11 and C13 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Assemble
M325C Material Handler Fuel System Water Separator Element - Replace
345B Excavator Hydraulic System Counterweight (Removal and Installation Hydraulic System)
315C Excavator Machine Systems Boom Cylinder - Remove and Install
M325D MH Material Handler Window Washer Reservoir - Fill
2003/09/15 An Improved Alternator Belt is Used {1357}
2003/10/01 An Improved Alternator Belt is Used {1357}
321C LCR Excavator Machine Systems Swivel - Remove
321C LCR Excavator Machine Systems Swivel - Install
SW45 and SW60 Wheel Saws Frame (Rear) - Remove and Install
Custom Product Support Literature for the Hydraulic Adjustment Procedure for the Long Reach Front on 320C L, 322C L, 325C L and 330C L Excavators{5050, 5117, 5456, 5458} Custom Product Support Literature for the Hydraulic Adjustment Procedure for the Long Reach Front on 320C L, 322C L, 325C L and 330C L Excavators{5050, 5117, 5456, 5458}
321C LCR Excavator Machine Systems Cab - Remove
321C LCR Excavator Machine Systems Cab - Install
SW45 and SW60 Wheel Saws Check Valve - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.